VCMA-0530-2R2-M-1A
MAZO 2.2 µH 50 V shielded power inductor
- 인덕턴스
- 2.2 µH
- Isat
- 8.5 A
- Idc
- 5.5 A
- DCR 최대
- 26 mΩ
- 브랜드
- MAZO
- 시리즈
- VCMA-0530
- 크기
- 5.7 × 5.4 × 3 mm
- 관련 애플리케이션
- 차량용 / OBC
- 특징
- AEC-Q200자기 차폐RoHS할로겐 프리
- 재고
- 제조사 재고 있음
제조사 시리즈 이미지
사양
Inductance L02.2 µH ±20% (1 MHz, 1.0 V)
DCR typ.23 mΩ
DCR max.26 mΩ
Heating current Idc typ.5.5 A
Heating current Idc max.5 A
Saturation current Isat typ.8.5 A
Saturation current Isat max.8 A
Rated voltage max.50 V
Package5.7 × 5.4 × 3.0 mm max
Operating temperature-55 °C to +125 °C (ambient plus self-temperature rise)
Magnetic constructionMagnetically shielded, low EMI
QualificationAEC-Q200 qualified; RoHS compliant; halogen free
Packaging2000 pieces/reel
ApplicationsAutomotive applications
BrandMAZO / Mazotech
데이터시트 요점
- 권장 랜드 패턴
- 2.5 × 1.9 mm 패드 2개, 간격 2.2 mm, 전체 길이 6 mm
- 인덕턴스 측정 조건
- 1 MHz, 1.0 V, 25 °C
- 전류 정의
- Isat: 인덕턴스 약 30% 감소; Idc: 온도 상승 약 40 °C
- 솔더링
- 리플로우(J-STD-020 준수)
- 작동 온도(주위 + 자체 발열)
- -55 ~ +125 °C
- 보관 온도
- -55 ~ +125 °C
- 포장
- 릴당 2000개; 캐리어 테이프 포켓 5.7±0.10 × 5.9±0.10 × 3.3±0.15 mm
MAZO 데이터시트 VCMA-0530-XXX-M-1A, 개정 A2, 2025-11-26, 4페이지
특성 곡선
MAZO 데이터시트의 대표 곡선이며 참고용입니다.
솔더링 및 포장
이 부품들의 대체품
VCMA-0530-2R2-M-1A 제품은 아래 부품과 풋프린트 클래스와 공칭값이 같습니다. 교체하기 전에 패드를 확인하고 샘플로 시험하세요.
| 브랜드 | 부품 번호 | 인덕턴스 | Isat | Irms | DCR 최대 | 크기 | 풋프린트 | 권장 패드 | 이 부품 대비 VCMA-0530-2R2-M-1A |
|---|---|---|---|---|---|---|---|---|---|
| TDK | SPM5030VT-2R2M-DSPM5030VT-D | 2.2 µH | 9 A | 6.6 A | 20 mΩ | 5.3 × 5.1 × 3 mm | 패드 호환 | 2.6 × 2.15 mm, 간격 2.2 mmMAZO와 근접(차이 0.5 mm) | 설계 여유가 있으면 대체 가능 |
| TDK | SPM5030T-2R2M-HZSPM5030T-HZ | 2.2 µH | 4.8 A · 20% | 8.5 A · 40 °C | 21.3 mΩ | 5.2 × 5 × 3 mm | 패드 호환 | 2.2 × 1.5 mm, 간격 2.7 mmMAZO와 근접(차이 0.5 mm) | 수치 열세 |
| Bourns | SRP5030TA-2R2MSRP5030TA | 2.2 µH | 9 A · 20% | 5.5 A · 40 °C | 35 mΩ | 5.7 × 5.3 × 3 mm | 동일 풋프린트 클래스 | 1.8 × 2 mm, 간격 2.5 mmMAZO와 다름(차이 0.7 mm) | 수치 적합, 패드 확인 필요 |
| Cyntec | VCMT053T-2R2MN52MVCMT053T MN52M | 2.2 µH | 6.3 A · 20% | 7.1 A · 40 °C | 23 mΩ | 5.45 × 5.25 × 3 mm | 동일 풋프린트 클래스 | 2.79 × 1.905 mm, 간격 2.946 mmMAZO와 다름(차이 0.756 mm) | 여유 시 가능, 패드 확인 필요 |
| Vishay | IHLP2020CZER2R2M01IHLP-2020CZ-01 | 2.2 µH | 10 A · 20% | 5.8 A · 40 °C | 29.2 mΩ | 5.18 × 5.49 × 3 mm | 동일 풋프린트 클래스 | 2.79 × 1.905 mm, 간격 2.946 mmMAZO와 다름(차이 0.756 mm) | 여유 시 가능, 패드 확인 필요 |
| Bourns | SRP5030CA-2R2MSRP5030CA | 2.2 µH | 10 A · 30% | 9.7 A · 40 °C | 14.5 mΩ | 5.5 × 5.3 × 3.1 mm | 동일 풋프린트 클래스 | 4.7 × 1.25 mm, 간격 2 mmMAZO와 다름(차이 2.2 mm) | 수치 열세 |
| Coilcraft | XAL5030-222MECXAL5030 | 2.2 µH | 9.2 A · 30% | 9.7 A · 40 °C | 14.5 mΩ | 5.28 × 5.48 × 3.1 mm | 동일 풋프린트 클래스 | 4.7 × 1.18 mm, 간격 2.13 mmMAZO와 다름(차이 2.2 mm) | 수치 열세 |
| Würth Elektronik | 74437336022WE-LHMI 5030 | 2.2 µH | 14 A · 30% | 6.2 A · 40 °C | 35 mΩ | 5.7 × 5.2 × 3 mm | 동일 풋프린트 클래스 | 1.8 × 2 mm, 간격 2.5 mmMAZO와 다름(차이 0.7 mm) | 수치 열세 |
| Würth Elektronik | 74439334022WE-XHMI 5030 | 2.2 µH | 12.8 A · 30% | 10.3 A · 40 °C | 14.52 mΩ | 5.55 × 5.35 × 3 mm | 동일 풋프린트 클래스 | 4.8 × 1.3 mm, 간격 2.05 mmMAZO와 다름(차이 2.3 mm) | 수치 열세 |
각 비교의 의미(9건)
- TDK SPM5030VT-2R2M-D (SPM5030VT-D): Same inductance, 2.2 µH vs MAZO 2.2 µH. Saturation current 9 A (basis not stated) vs MAZO 8.5 A typ. (30% drop), rated on different bases so not directly comparable; heating current 6.6 A (basis not stated) vs MAZO 5.5 A typ. (40 °C rise), rated on different bases so not directly comparable. DCR 20 mΩ max vs MAZO 26 mΩ max. Body 5.3 × 5.1 × 3 mm vs MAZO 5.7 × 5.4 × 3 mm. Land pattern close to MAZO's: two 2.6 × 2.15 mm pads 2.2 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (overall span differs by 0.5 mm). Verdict: replaceable with design margin (DCR slightly higher). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- TDK SPM5030T-2R2M-HZ (SPM5030T-HZ): Same inductance, 2.2 µH vs MAZO 2.2 µH. Saturation current 4.8 A (20% drop) vs MAZO 8.5 A typ. (30% drop), rated on different bases so not directly comparable; heating current 8.5 A (40 °C rise) vs MAZO 5.5 A typ. (40 °C rise). DCR 21.3 mΩ max vs MAZO 26 mΩ max. Body 5.2 × 5 × 3 mm vs MAZO 5.7 × 5.4 × 3 mm. Land pattern close to MAZO's: two 2.2 × 1.5 mm pads 2.7 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (gap differs by 0.5 mm). Verdict: MAZO figures are weaker, consider only with ample margin (Idc about 35% lower at 40 °C rise, DCR slightly higher). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Bourns SRP5030TA-2R2M: Same inductance, 2.2 µH vs MAZO 2.2 µH. Saturation current 9 A (20% drop) vs MAZO 8.5 A typ. (30% drop), rated on different bases so not directly comparable; heating current 5.5 A (40 °C rise) vs MAZO 5.5 A typ. (40 °C rise). DCR 35 mΩ max vs MAZO 26 mΩ max. Body 5.7 × 5.3 × 3 mm vs MAZO 5.7 × 5.4 × 3 mm. Land pattern differs from MAZO's: two 1.8 × 2 mm pads 2.5 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (pad width differs by 0.7 mm). Verdict: the figures qualify, but the pads need checking (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Cyntec VCMT053T-2R2MN52M (VCMT053T MN52M): Same inductance, 2.2 µH vs MAZO 2.2 µH. Saturation current 6.3 A (20% drop) vs MAZO 8.5 A typ. (30% drop), rated on different bases so not directly comparable; heating current 7.1 A (40 °C rise) vs MAZO 5.5 A typ. (40 °C rise). DCR 23 mΩ max vs MAZO 26 mΩ max. Body 5.45 × 5.25 × 3 mm vs MAZO 5.7 × 5.4 × 3 mm. Land pattern differs from MAZO's: two 2.79 × 1.905 mm pads 2.946 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (overall span differs by 0.756 mm). Verdict: replaceable with design margin, pads need checking (Idc about 23% lower at 40 °C rise, DCR slightly higher). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Vishay IHLP2020CZER2R2M01 (IHLP-2020CZ-01): Same inductance, 2.2 µH vs MAZO 2.2 µH. Saturation current 10 A (20% drop) vs MAZO 8.5 A typ. (30% drop), rated on different bases so not directly comparable; heating current 5.8 A (40 °C rise) vs MAZO 5.5 A typ. (40 °C rise). DCR 29.2 mΩ max vs MAZO 26 mΩ max. Body 5.18 × 5.49 × 3 mm vs MAZO 5.7 × 5.4 × 3 mm. Land pattern differs from MAZO's: two 2.79 × 1.905 mm pads 2.946 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (overall span differs by 0.756 mm). Verdict: replaceable with design margin, pads need checking (Idc about 5% lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples.
- Bourns SRP5030CA-2R2M: Same inductance, 2.2 µH vs MAZO 2.2 µH. Saturation current 10 A (30% drop) vs MAZO 8.5 A typ. (30% drop); heating current 9.7 A (40 °C rise) vs MAZO 5.5 A typ. (40 °C rise). DCR 14.5 mΩ max vs MAZO 26 mΩ max. Body 5.5 × 5.3 × 3.1 mm vs MAZO 5.7 × 5.4 × 3 mm, MAZO 0.1 mm lower. Land pattern differs from MAZO's: two 4.7 × 1.25 mm pads 2 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (pad width differs by 2.2 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 15% lower, Idc about 43% lower at 40 °C rise, DCR slightly higher). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Coilcraft XAL5030-222MEC: Same inductance, 2.2 µH vs MAZO 2.2 µH. Saturation current 9.2 A (30% drop) vs MAZO 8.5 A typ. (30% drop); heating current 9.7 A (40 °C rise) vs MAZO 5.5 A typ. (40 °C rise). DCR 14.5 mΩ max vs MAZO 26 mΩ max. Body 5.28 × 5.48 × 3.1 mm vs MAZO 5.7 × 5.4 × 3 mm, MAZO 0.1 mm lower. Land pattern differs from MAZO's: two 4.7 × 1.18 mm pads 2.13 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (pad width differs by 2.2 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 8% lower, Idc about 43% lower at 40 °C rise, DCR slightly higher). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Würth Elektronik 74437336022 (WE-LHMI 5030): Same inductance, 2.2 µH vs MAZO 2.2 µH. Saturation current 14 A (30% drop) vs MAZO 8.5 A typ. (30% drop); heating current 6.2 A (40 °C rise) vs MAZO 5.5 A typ. (40 °C rise). DCR 35 mΩ max vs MAZO 26 mΩ max. Body 5.7 × 5.2 × 3 mm vs MAZO 5.7 × 5.4 × 3 mm. Land pattern differs from MAZO's: two 1.8 × 2 mm pads 2.5 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (pad width differs by 0.7 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 39% lower, Idc about 11% lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples.
- Würth Elektronik 74439334022 (WE-XHMI 5030): Same inductance, 2.2 µH vs MAZO 2.2 µH. Saturation current 12.8 A (30% drop) vs MAZO 8.5 A typ. (30% drop); heating current 10.3 A (40 °C rise) vs MAZO 5.5 A typ. (40 °C rise). DCR 14.52 mΩ max vs MAZO 26 mΩ max. Body 5.55 × 5.35 × 3 mm vs MAZO 5.7 × 5.4 × 3 mm. Land pattern differs from MAZO's: two 4.8 × 1.3 mm pads 2.05 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (pad width differs by 2.3 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 34% lower, Idc about 47% lower at 40 °C rise, DCR slightly higher). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
수치 비교 방법
Isat와 Irms는 각 데이터시트의 정의를 따르며 기준을 수치 뒤에 표시합니다. MAZO 수치는 사양표의 대표값입니다.
권장 패드: 각 데이터시트가 권장하는 패드 폭 × 패드 길이와 두 패드 사이 간격을 MAZO와 비교했습니다.
같은 풋프린트의 다른 값
본체 크기가 같은 5.7 × 5.4 mm 부품을 인덕턴스 순으로 표시합니다. 교체 전에 높이를 확인하세요.
| 부품 번호 | 인덕턴스 | Isat | Idc | DCR 최대 | 높이 | 단가 |
|---|---|---|---|---|---|---|
| VCMA-0530-R33-M-1A | 0.33 µH | 19 A | 16 A | 5 mΩ | 3 mm | $0.29 |
| VCMA-0530-R47-M-1A | 0.47 µH | 18 A | 10 A | 8.5 mΩ | 3 mm | $0.30 |
| VCMA-0530-R68-M-1A | 0.68 µH | 15 A | 9 A | 9.8 mΩ | 3 mm | $0.30 |
| VCMA-0530-1R0-M-1A | 1 µH | 11 A | 8.5 A | 13 mΩ | 3 mm | $0.30 |
| VCMA-0530-1R5-M-1A | 1.5 µH | 10 A | 8 A | 18 mΩ | 3 mm | $0.30 |
| VCMA-0530-3R3-M-1A | 3.3 µH | 7.5 A | 4.8 A | 37 mΩ | 3 mm | $0.27 |
| VCMA-0530-4R7-M-1A | 4.7 µH | 5.5 A | 3.5 A | 58 mΩ | 3 mm | $0.30 |
| VCMA-0530-6R8-M-1A | 6.8 µH | 4 A | 3 A | 90 mΩ | 3 mm | $0.33 |
| VCMA-0530-100-M-1A | 10 µH | 3 A | 2.5 A | 125 mΩ | 3 mm | $0.20 |
같은 인덕턴스의 다른 크기
작은 순. 본체가 클수록 대체로 전류 여유가 큽니다. 패드는 다릅니다.
| 부품 번호 | 인덕턴스 | Isat | Idc | DCR 최대 | 본체 크기 | 단가 |
|---|---|---|---|---|---|---|
| VCMA-0420-2R2-M-1A | 2.2 µH | 5.5 A | 4.2 A | 50 mΩ | 4.75 × 4.45 × 2 mm | $0.21 |
| VCMA-0630-2R2-M-1A | 2.2 µH | 12.5 A | 9.5 A | 15 mΩ | 7.3 × 6.8 × 3 mm | $0.23 |
| VCMA-1040-2R2-M-1A | 2.2 µH | 19 A | 14 A | 7 mΩ | 11.5 × 10.3 × 4 mm | $0.52 |
| VCMA-1350-2R2-M-1A | 2.2 µH | 28 A | 21 A | 4.6 mΩ | 13.8 × 12.9 × 5 mm | $0.72 |
| VCMA-1365-2R2-M-1A | 2.2 µH | 35 A | 30 A | 3.2 mΩ | 13.8 × 12.9 × 6.5 mm | $0.79 |
구매
단가 · USD / 개$0.305개 기준
수량별 가격구간을 선택하면 수량이 설정됩니다.
| 수량 | 단가 | 소계 |
|---|---|---|
| 5–49 | $0.3 | $1.50 |
| 50–149 | $0.22 | $11.00 |
| 150–499 | $0.182 | $27.30 |
| 500–2999 | $0.14 | $70.00 |
상품 소계$1.50품목 금액만 포함되며 포장, 취급, 배송, 관세, 세금은 제외됩니다. 포장 및 취급 비용은 장바구니에 표시됩니다. 배송, 관세, 세금은 별도로 확정됩니다.
- 최소 주문 수량
- 5개
- 주문 단위
- 1개
- 가용성
- 제조사 재고 있음
- 발송 준비
- 2일
중국에서 발송배송 방법: DHL Express배송 국가를 선택하면 예상 운송 기간이 표시됩니다.
발송 준비 기간과 운송 기간은 별도로 계산합니다. 도착일은 예상이며 실제 운송 경로와 주문 배송 조회 정보를 따릅니다.
포장선택한 수량 기준
- 풀 릴 표준 수량
- 2000개
- 포장 형태
- 컷 테이프 · 5개
- 컷 테이프 요금
- 없음
- 온라인 주문 한도
- 2999개
포장 및 취급 비용은 장바구니에 표시됩니다. 배송비, 관세, 세금은 별도로 확정됩니다.
이 수량을 장바구니에 담아 주문 비용과 이용 가능한 결제 단계를 확인하세요. 요청 시 로그인해 주세요.
선정 및 용도
선정 방법
Choosing inductance
L ≈ (Vin − Vout) × Vout ÷ (Vin × fsw × ΔI), with ΔI at 20–40% of the output current. The series covers 0.33–10 µH in one body, so changing the value needs no new layout.
Saturation current Isat
the current at which inductance falls about 30%; keep the peak current below it.
Heating current Idc
the current that raises the part about 40 °C above a 25 °C ambient; ambient plus rise stays within 125 °C.
DC resistance
sets the conduction loss. Typical 4.5–110 mΩ across the series; use the maximum for loss budgets.
Rated voltage
50 V maximum; check it against the input voltage.
Height
Max 3.0 mm. Lower: VCMA-0420; same height, more current: VCMA-0630.