VCMA-1365-3R3-M-1A
MAZO 3.3 µH 22 A shielded power inductor
- インダクタンス
- 3.3 µH
- Isat
- 25 A
- Idc
- 22 A
- DCR 最大
- 4.5 mΩ
- ブランド
- MAZO
- シリーズ
- VCMA-1365
- サイズ
- 13.8 × 12.9 × 6.5 mm
- 関連する用途
- 車載 / OBC
- 特長
- AEC-Q200磁気シールドRoHSハロゲンフリー
- 在庫
- メーカー在庫あり
メーカーシリーズ画像
仕様
BrandMAZO / Mazotech
SeriesVCMA-1365
Inductance L03.3 µH ±20% (1 MHz, 1.0 V)
DCR typ.3.7 mΩ
DCR max.4.5 mΩ
Heating current Idc typ.22 A
Heating current Idc max.20 A
Saturation current Isat typ.25 A
Saturation current Isat max.23 A
Rated voltage max.75 V
Package13.8 × 12.9 × 6.5 mm max
Operating temperature-55 °C to +125 °C (ambient plus self-temperature rise)
Magnetic constructionMagnetically shielded, low EMI
QualificationAEC-Q200 qualified; RoHS compliant; halogen free
Packaging500 pieces/reel
ApplicationsAutomotive applications
データシートの要点
- 推奨ランドパターン
- 5.5 × 3.25 mm のパッド 2 個、間隔 8 mm、全長 14.5 mm
- インダクタンス測定条件
- 1 MHz、1.0 V、25 °C
- 電流の定義
- Isat：インダクタンスが約 30% 低下；Idc：温度上昇 約 40 °C
- はんだ付け
- リフロー（J-STD-020 準拠）
- 使用温度（周囲 + 自己発熱）
- -55 ~ +125 °C
- 保存温度
- -55 ~ +125 °C
- 梱包
- 1 リール 500 個；キャリアテープのポケット 13.4±0.10 × 14.1±0.10 × 6.9±0.15 mm
MAZO データシート VCMA-1365-XXX-M-1A、改訂 A3、2025-11-26、4 ページ
特性グラフ
MAZO データシートの代表特性です（参考値）。
はんだ付けと梱包
以下の部品の代替品
VCMA-1365-3R3-M-1A は下記の部品と同じフットプリントクラス・同じ公称値です。置き換える前にランドを確認し、サンプルで評価してください。
| ブランド | 部品番号 | インダクタンス | Isat | Irms | DCR 最大 | サイズ | フットプリント | 推奨ランド | この部品と比べた VCMA-1365-3R3-M-1A |
|---|---|---|---|---|---|---|---|---|---|
| Cyntec | VCMT136E-3R3MN54MVCMT136E MN54M | 3.3 µH | 17 A · 20% | 18.3 A · 40 °C | 6 mΩ | 13.45 × 12.6 × 6.3 mm | パッド互換 | 4.953 × 3.226 mm、間隔 8.28 mmMAZO に近い（差 0.547 mm） | そのまま置換できる候補 |
| Bourns | SRP1265A-3R3MSRP1265A | 3.3 µH | 30 A · 20% | 18 A · 40 °C | 6.8 mΩ | 13.5 × 12.5 × 6.2 mm | パッド互換 | 5 × 3.1 mm、間隔 8 mmMAZO に近い（差 0.5 mm） | 設計マージンがあれば置換可 |
| Cyntec | VCMI136E-3R3MN54MVCMI136E MN54M | 3.3 µH | 30 A · 20% | 18.6 A · 40 °C | 5.6 mΩ | 13.45 × 12.6 × 6.3 mm | パッド互換 | 4.953 × 3.226 mm、間隔 8.28 mmMAZO に近い（差 0.547 mm） | 設計マージンがあれば置換可 |
| Bourns | SRP1265CC-3R3MSRP1265CC | 3.3 µH | 35 A · 30% | 22 A · 40 °C | 6.8 mΩ | 13.5 × 12.5 × 6.2 mm | パッド互換 | 5 × 3.1 mm、間隔 8 mmMAZO に近い（差 0.5 mm） | 数値が劣る |
| Cyntec | CMLS136E-3R3MSCMLS136E | 3.3 µH | 42 A · 30% | 22 A · 40 °C | 4.4 mΩ | 13.45 × 12.6 × 6.3 mm | パッド互換 | 5 × 3.3 mm、間隔 8 mmMAZO に近い（差 0.5 mm） | 数値が劣る |
| Würth Elektronik | 744373965033WE-LHMI 1365 | 3.3 µH | 41.5 A · 30% | 16.2 A · 40 °C | 6.8 mΩ | 13.5 × 12.5 × 6.2 mm | パッド互換 | 5 × 3.1 mm、間隔 8 mmMAZO に近い（差 0.5 mm） | 数値が劣る |
| Cyntec | VCMV136E-3R3MN24MVCMV136E MN24M | 3.3 µH | 35 A · 20% | 22.9 A · 40 °C | 6.6 mΩ | 13.45 × 12.6 × 6.3 mm | 同一フットプリントクラス | 5.7 × 4.335 mm、間隔 7.2 mmMAZO と異なる（差 1.37 mm） | 数値が劣る |
| TDK | SPM12565VC-3R3M-DSPM12565VC-D | 3.3 µH | 35.4 A · 30% | 17 A · 40 °C | 5.64 mΩ | 13 × 12.5 × 6.5 mm | 同一フットプリントクラス | 5 × 3.25 mm、間隔 8.2 mmMAZO に近い（差 0.5 mm） | 数値が劣る |
| TDK | SPM12565VT-3R3M-DSPM12565VT-D | 3.3 µH | 34.6 A · 30% | 16.8 A · 40 °C | 5.39 mΩ | 13 × 12.5 × 6.5 mm | 同一フットプリントクラス | 5 × 3.25 mm、間隔 8.2 mmMAZO に近い（差 0.5 mm） | 数値が劣る |
| Vishay | IHLP5050FDEK3R3M01IHLP-5050FD-01 | 3.3 µH | 35 A · 20% | 18 A · 40 °C | 6.8 mΩ | 13.2 × 12.9 × 6.4 mm | 同一フットプリントクラス | 4.95 × 2.945 mm、間隔 7.87 mmMAZO と異なる（差 0.74 mm） | 数値が劣る |
| Vishay | IHLP5050FDER3R3MA1IHLP-5050FD-A1 | 3.3 µH | 35 A · 20% | 18 A · 40 °C | 6.8 mΩ | 13.2 × 12.9 × 6.4 mm | 同一フットプリントクラス | 4.953 × 3.226 mm、間隔 8.28 mmMAZO に近い（差 0.547 mm） | 数値が劣る |
各比較の説明（11 件）
- Cyntec VCMT136E-3R3MN54M (VCMT136E MN54M): Same inductance, 3.3 µH vs MAZO 3.3 µH. Saturation current 17 A (20% drop) vs MAZO 25 A typ. (30% drop), rated on different bases so not directly comparable; heating current 18.3 A (40 °C rise) vs MAZO 22 A typ. (40 °C rise). DCR 6 mΩ max vs MAZO 4.5 mΩ max. Body 13.45 × 12.6 × 6.3 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.2 mm taller. Land pattern close to MAZO's: two 4.953 × 3.226 mm pads 8.28 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.547 mm). Verdict: drop-in candidate (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Bourns SRP1265A-3R3M: Same inductance, 3.3 µH vs MAZO 3.3 µH. Saturation current 30 A (20% drop) vs MAZO 25 A typ. (30% drop), rated on different bases so not directly comparable; heating current 18 A (40 °C rise) vs MAZO 22 A typ. (40 °C rise). DCR 6.8 mΩ max vs MAZO 4.5 mΩ max. Body 13.5 × 12.5 × 6.2 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.3 mm taller. Land pattern close to MAZO's: two 5 × 3.1 mm pads 8 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.5 mm). Verdict: replaceable with design margin (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Cyntec VCMI136E-3R3MN54M (VCMI136E MN54M): Same inductance, 3.3 µH vs MAZO 3.3 µH. Saturation current 30 A (20% drop) vs MAZO 25 A typ. (30% drop), rated on different bases so not directly comparable; heating current 18.6 A (40 °C rise) vs MAZO 22 A typ. (40 °C rise). DCR 5.6 mΩ max vs MAZO 4.5 mΩ max. Body 13.45 × 12.6 × 6.3 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.2 mm taller. Land pattern close to MAZO's: two 4.953 × 3.226 mm pads 8.28 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.547 mm). Verdict: replaceable with design margin (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Bourns SRP1265CC-3R3M: Same inductance, 3.3 µH vs MAZO 3.3 µH. Saturation current 35 A (30% drop) vs MAZO 25 A typ. (30% drop); heating current 22 A (40 °C rise) vs MAZO 22 A typ. (40 °C rise). DCR 6.8 mΩ max vs MAZO 4.5 mΩ max. Body 13.5 × 12.5 × 6.2 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.3 mm taller. Land pattern close to MAZO's: two 5 × 3.1 mm pads 8 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.5 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 29% lower, Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples.
- Cyntec CMLS136E-3R3MS: Same inductance, 3.3 µH vs MAZO 3.3 µH. Saturation current 42 A (30% drop) vs MAZO 25 A typ. (30% drop); heating current 22 A (40 °C rise) vs MAZO 22 A typ. (40 °C rise). DCR 4.4 mΩ max vs MAZO 4.5 mΩ max. Body 13.45 × 12.6 × 6.3 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.2 mm taller. Land pattern close to MAZO's: two 5 × 3.3 mm pads 8 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.5 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 40% lower, Idc not lower at 40 °C rise, DCR slightly higher). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples.
- Würth Elektronik 744373965033 (WE-LHMI 1365): Same inductance, 3.3 µH vs MAZO 3.3 µH. Saturation current 41.5 A (30% drop) vs MAZO 25 A typ. (30% drop); heating current 16.2 A (40 °C rise) vs MAZO 22 A typ. (40 °C rise). DCR 6.8 mΩ max vs MAZO 4.5 mΩ max. Body 13.5 × 12.5 × 6.2 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.3 mm taller. Land pattern close to MAZO's: two 5 × 3.1 mm pads 8 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.5 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 40% lower, Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples.
- Cyntec VCMV136E-3R3MN24M (VCMV136E MN24M): Same inductance, 3.3 µH vs MAZO 3.3 µH. Saturation current 35 A (20% drop) vs MAZO 25 A typ. (30% drop), rated on different bases so not directly comparable; heating current 22.9 A (40 °C rise) vs MAZO 22 A typ. (40 °C rise). DCR 6.6 mΩ max vs MAZO 4.5 mΩ max. Body 13.45 × 12.6 × 6.3 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.2 mm taller. Land pattern differs from MAZO's: two 5.7 × 4.335 mm pads 7.2 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (overall span differs by 1.37 mm). Verdict: MAZO figures are weaker, consider only with ample margin (Idc about 4% lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- TDK SPM12565VC-3R3M-D (SPM12565VC-D): Same inductance, 3.3 µH vs MAZO 3.3 µH. Saturation current 35.4 A (30% drop) vs MAZO 25 A typ. (30% drop); heating current 17 A (40 °C rise) vs MAZO 22 A typ. (40 °C rise). DCR 5.64 mΩ max vs MAZO 4.5 mΩ max. Body 13 × 12.5 × 6.5 mm vs MAZO 13.8 × 12.9 × 6.5 mm. Land pattern close to MAZO's: two 5 × 3.25 mm pads 8.2 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.5 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 29% lower, Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- TDK SPM12565VT-3R3M-D (SPM12565VT-D): Same inductance, 3.3 µH vs MAZO 3.3 µH. Saturation current 34.6 A (30% drop) vs MAZO 25 A typ. (30% drop); heating current 16.8 A (40 °C rise) vs MAZO 22 A typ. (40 °C rise). DCR 5.39 mΩ max vs MAZO 4.5 mΩ max. Body 13 × 12.5 × 6.5 mm vs MAZO 13.8 × 12.9 × 6.5 mm. Land pattern close to MAZO's: two 5 × 3.25 mm pads 8.2 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.5 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 28% lower, Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Vishay IHLP5050FDEK3R3M01 (IHLP-5050FD-01): Same inductance, 3.3 µH vs MAZO 3.3 µH. Saturation current 35 A (20% drop) vs MAZO 25 A typ. (30% drop), rated on different bases so not directly comparable; heating current 18 A (40 °C rise) vs MAZO 22 A typ. (40 °C rise). DCR 6.8 mΩ max vs MAZO 4.5 mΩ max. Body 13.2 × 12.9 × 6.4 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.1 mm taller. Land pattern differs from MAZO's: two 4.95 × 2.945 mm pads 7.87 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (overall span differs by 0.74 mm). Verdict: MAZO figures are weaker, consider only with ample margin (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples.
- Vishay IHLP5050FDER3R3MA1 (IHLP-5050FD-A1): Same inductance, 3.3 µH vs MAZO 3.3 µH. Saturation current 35 A (20% drop) vs MAZO 25 A typ. (30% drop), rated on different bases so not directly comparable; heating current 18 A (40 °C rise) vs MAZO 22 A typ. (40 °C rise). DCR 6.8 mΩ max vs MAZO 4.5 mΩ max. Body 13.2 × 12.9 × 6.4 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.1 mm taller. Land pattern close to MAZO's: two 4.953 × 3.226 mm pads 8.28 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.547 mm). Verdict: MAZO figures are weaker, consider only with ample margin (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
数値の比較方法
Isat と Irms は各社データシートの定義どおりで、基準を数値の後に示しています。MAZO の数値は仕様表の標準値です。
推奨ランド：各社データシートが推奨するパッド幅 × パッド長と 2 つのパッドの間隔を、MAZO と比較しています。
同じフットプリントの他の値
本体サイズが同じ 13.8 × 12.9 mm の部品をインダクタンス順に表示。置き換える前に高さを確認してください。
| 部品番号 | インダクタンス | Isat | Idc | DCR 最大 | 高さ | 単価 |
|---|---|---|---|---|---|---|
| VCMA-1350-R82-M-1A | 0.82 µH | 45 A | 31 A | 1.6 mΩ | 5 mm | $0.75 |
| VCMA-1350-1R0-M-1A | 1 µH | 39.5 A | 26 A | 2 mΩ | 5 mm | $0.75 |
| VCMA-1365-1R0-M-1A | 1 µH | 43 A | 38 A | 1.9 mΩ | 6.5 mm | $0.79 |
| VCMA-1350-1R5-M-1A | 1.5 µH | 39 A | 23 A | 3.1 mΩ | 5 mm | $0.75 |
| VCMA-1365-1R5-M-1A | 1.5 µH | 40 A | 35 A | 2.5 mΩ | 6.5 mm | $0.79 |
| VCMA-1350-2R2-M-1A | 2.2 µH | 28 A | 21 A | 4.6 mΩ | 5 mm | $0.72 |
| VCMA-1365-2R2-M-1A | 2.2 µH | 35 A | 30 A | 3.2 mΩ | 6.5 mm | $0.79 |
| VCMA-1350-3R3-M-1A | 3.3 µH | 24 A | 16 A | 6.9 mΩ | 5 mm | $0.75 |
| VCMA-1350-4R7-M-1A | 4.7 µH | 20.5 A | 14 A | 9.2 mΩ | 5 mm | $0.75 |
| VCMA-1365-4R7-M-1A | 4.7 µH | 24 A | 20 A | 6.9 mΩ | 6.5 mm | $0.79 |
| VCMA-1350-5R6-M-1A | 5.6 µH | 20 A | 12 A | 12 mΩ | 5 mm | $0.75 |
| VCMA-1365-5R6-M-1A | 5.6 µH | 22 A | 18 A | 8.2 mΩ | 6.5 mm | $0.90 |
同じインダクタンスの他のサイズ
小さい順。本体が大きいほど一般に電流に余裕があります。ランドは異なります。
| 部品番号 | インダクタンス | Isat | Idc | DCR 最大 | 本体サイズ | 単価 |
|---|---|---|---|---|---|---|
| VCMA-0420-3R3-M-1A | 3.3 µH | 4.5 A | 3.3 A | 82 mΩ | 4.75 × 4.45 × 2 mm | $0.23 |
| VCMA-0530-3R3-M-1A | 3.3 µH | 7.5 A | 4.8 A | 37 mΩ | 5.7 × 5.4 × 3 mm | $0.27 |
| VCMA-1040-3R3-M-1A | 3.3 µH | 17 A | 11.5 A | 11.8 mΩ | 11.5 × 10.3 × 4 mm | $0.55 |
購入
単価 · USD / 個$0.795 個の場合
数量別価格ティアを選択すると数量が設定されます。
| 数量 | 単価 | 金額 |
|---|---|---|
| 5–49 | $0.79 | $3.95 |
| 50–149 | $0.57 | $28.50 |
| 150–499 | $0.461 | $69.15 |
| 500–2999 | $0.356 | $178.00 |
商品小計$3.95商品金額のみで、包装、取扱手数料、送料、関税、税金は含みません。包装と取扱手数料はカートに表示されます。送料、関税、税金は別途確認します。
- 最小発注数量
- 5 個
- 発注単位
- 1 個
- 在庫状況
- メーカー在庫あり
- 発送準備
- 2 日
中国から発送配送方法：DHL Express配送先の国を選択すると輸送日数の目安を表示します。
発送準備と輸送の日数は別々に計算します。到着予定は目安です。実際の配送ルートと追跡情報をご確認ください。
包装選択した数量の場合
- フルリールの標準数量
- 500 個
- 包装形態
- カットテープ · 5 個
- カットテープ料金
- なし
- オンライン注文の上限
- 2999 個
包装と取扱手数料はカートに表示されます。送料、関税、税金は別途確定します。
この数量をカートに入れて、注文費用と利用可能な支払い手順を確認してください。求められた場合はログインしてください。
選定と用途
選定のポイント
Choosing inductance
L ≈ (Vin − Vout) × Vout ÷ (Vin × fsw × ΔI), with ΔI at 20–40% of the output current. The series covers 1.0–33 µH in one body, so changing the value needs no new layout.
Saturation current Isat
the current at which inductance falls about 30%; keep the peak current below it.
Heating current Idc
the current that raises the part about 40 °C above a 25 °C ambient; ambient plus rise stays within 125 °C.
DC resistance
sets the conduction loss. Typical 1.65–39 mΩ across the series; use the maximum for loss budgets.
Rated voltage
75 V maximum; check it against the input voltage.
Height
Max 6.5 mm. Height-limited: VCMA-1350 (5.0 mm) on the same land pattern.