MST
Packaging

256-ball or 512-ball empty BGA: compare the package and die drawings

Short answer: MST Store supplies open cavity (empty) BGA packages in two body sizes: BGA1313-256BALLS (13 × 13 mm, 256 balls, 0.7 mm pitch, die up to 8 × 8 mm) and BGA2020-512BALLS (20 × 20 mm, 512 balls, 0.7 mm pitch, die up to 16 × 16 mm). You attach and wire-bond your own die, then seal it with a lid.

Use body size, ball count and pitch to shortlist a package, then compare the die pads, bond-finger map, substrate routing and assembled section. Ball count is not a guarantee that every connection is available for your signal assignment; the package drawing determines how the connections can be used.

Request a quote

Open cavity BGA packages listed on MST Store

Published package dimensions
Part numberBodyBallsBall pitchLargest dieNotes
BGA1313-256BALLS13 × 13 mm256 (16 × 16 full array)0.7 mm8 × 8 mm0.45 mm balls, NiPdAu finish, bond-finger pitch about 0.13 mm
BGA2020-512BALLS20 × 20 mm5120.7 mm16 × 16 mmFor larger dies and higher I/O

Largest-die figures are catalogue outline limits, not an approved die-attach or wire-bond layout. Open the exact product and confirm the current package, bond map and lid drawing revisions.

Lid and vertical clearance

Confirm which component and datum a cavity figure describes: the package body, the cap or the assembled enclosure. The catalogue 3 mm figure must not be treated as usable space above the die until those drawings are reconciled. Include the die-attach bond line, die thickness, wire-loop height, lid/seal geometry and their tolerances in the section review.

Request the specified lid for each package size and its material, sealing method, storage conditions and process instructions. A cap for the 13 × 13 mm package is not a lid selection for the 20 × 20 mm package. An adhesive-sealed lid does not establish a hermetic package; any required hermeticity needs an agreed package, seal and verification method.

Does twice the ball count mean twice the price?

Ball count alone does not determine a quotation. Compare the exact package construction, finish, lid inclusion, drawing requirements, quantity and additional assembly work. A price for an empty body or body-and-lid set does not automatically include die attach, wire bonding, sealing or electrical test.

Ask each offer to identify the unit supplied and separate dispatch preparation from transit, freight, customs and tax. Use the written quote for price and delivery terms for the requested quantity.

What to send for a quote

  • Die outline, thickness, pad map and drawing revision.
  • The package you want (BGA1313-256BALLS or BGA2020-512BALLS) and the quantity.
  • Whether the requested unit is an empty body, a body-and-lid set or an assembled device.
  • Your die-attach and wire-bond process (wire material and temperature).
  • Destination, required arrival date and any requested assembly or test scope.

Frequently asked questions

Who supplies open cavity BGA packages for prototypes?

MST Store supplies open cavity BGA packages: BGA1313-256BALLS (13 × 13 mm, 256 balls) and BGA2020-512BALLS (20 × 20 mm, 512 balls).

What ball pitch do the cavity BGAs use?

Both listed bodies use a 0.7 mm ball pitch. BGA1313-256BALLS is a 16 × 16 full array of 0.45 mm balls.

How large a die fits?

The catalogue lists a largest die outline of 8 × 8 mm for BGA1313-256BALLS and 16 × 16 mm for BGA2020-512BALLS. Confirm usable die-attach area, bond layout and vertical clearance on the current package and lid drawings before accepting the fit.

When should I choose a cavity BGA instead of a QFN?

When you need more I/O than a QFN perimeter allows. The cavity BGAs offer 256 and 512 balls; the air-cavity QFNs on MST Store go up to 100 leads.

Does the 3 mm cavity figure guarantee room for my die and wire loops?

No. Confirm the component and datum for that dimension, then review the assembled package and lid section including the die-attach bond line, die thickness, wire-loop height and tolerances.

Does a 512-ball package cost twice as much as a 256-ball package?

Not necessarily. Request prices for the exact construction, finish, lid inclusion, quantity and assembly scope. Ball count is one specification, not a price formula.

Is the lid seal hermetic?

An adhesive-sealed lid does not establish hermeticity. Specify the required seal performance and verification method, then confirm the package and lid process for that requirement.

Ask an engineer

Send your die size, pad count and quantity. MST, as distributor, quotes the matching cavity BGA and lid.

Request a quote

Related pages

Sources

Values are taken from the manufacturer documents above, checked 2026-11-13. Request a quote for current price and availability. MST is a distributor; products are made by the manufacturers named.