MST
Power inductors

Coilcraft XAL4020 alternatives for new layouts: MAZO VCMA-0420 and VCMA-0630

Short answer: for a new layout running at 10 A RMS or less, MAZO VCMA-0420-R22-M-1A (0.22 µH, sold online in the MST store) is the part to evaluate instead of Coilcraft XAL4020-221. It does not fit existing XAL4020 pads: its land pattern spans 5.2 mm against 3.35 mm. If the rail needs the full XAL4020-221 heating current (16.8 A), the larger VCMA-0630-R22-M-1A (24 A max) covers it, also on a new layout only.

Price, factory stock and dispatch time are shown on each part page, next to the add-to-cart button. Freight, duties and tax are confirmed separately; transit time comes on top of dispatch preparation.

Ask an engineer

MAZO 0.22 µH parts you can buy online

XAL4020-221 and two MAZO 0.22 µH inductors drawn to scale with land patterns and current ratings
Coilcraft XAL4020-221 against MAZO VCMA-0420-R22-M-1A and VCMA-0630-R22-M-1A, to scale, with each datasheet’s recommended land pattern.
Both need a new layout; neither fits XAL4020 pads
MAZO part (0.22 µH)Heating current (~40 °C rise)Saturation current (~30 % drop)Body, maxRated voltageFits XAL4020 pads?
VCMA-0420-R22-M-1A12 A typ / 10 A max18.5 A typ / 17.5 A max4.75 × 4.45 × 2.0 mm40 VNo
VCMA-0630-R22-M-1A24.5 A typ / 24 A max40 A typ / 35 A max7.3 × 6.8 × 3.0 mm75 VNo

Buy either part from its product page (links under Related pages): price tiers, factory stock, dispatch preparation and MOQ are shown there from the live catalog.

Which one for your board

  • New layout, ≤ 10 A RMS: VCMA-0420-R22-M-1A. The smallest MAZO option; design to the 10 A MAX column.
  • New layout, more than 10 A RMS, up to the XAL4020-221’s 16.8 A: VCMA-0630-R22-M-1A. Lower DCR (2.5 mΩ typ) and a 75 V rating, but a 7 × 7 mm-class body.
  • Existing XAL4020 board, no re-layout: MST has no MAZO part with published ratings that fits these pads. Send a sourcing request for genuine Coilcraft parts or a pad-compatible option.

XAL4020-221 vs VCMA-0420-R22-M-1A, value by value

Values from each manufacturer datasheet
Coilcraft XAL4020-221MAZO VCMA-0420-R22-M-1ADifference
Inductance0.22 µH ±20% (1 MHz, 0.1 Vrms)0.22 µH ±20% (1 MHz, 1.0 V)Test level differs
DCR typ / max5.81 / 6.40 mΩ5.0 / 5.6 mΩMAZO lower
Heating current16.8 A (40 °C rise); 12.0 A (20 °C rise)12 A typ / 10 A max (~40 °C rise)MAZO lower
Saturation current18.7 A (30 % drop)18.5 A typ / 17.5 A max (~30 % drop)About equal
Land pattern span3.35 mm5.2 mmNot compatible
Rated voltage60 V40 VMAZO lower
Max part temperature165 °C125 °CMAZO lower
AEC-Q200YesYesSame

Not an equivalent part. Verify ripple, temperature rise and EMI on your board.

XAL4020 series: nearest MAZO value

Values at 25 °C from each manufacturer datasheet
InductanceCoilcraft partDCR typ / max (mΩ)Isat (A)Irms 40 °C rise (A)MAZO partDCR typ / max (mΩ)Isat typ (A)Idc typ (A)
0.22 µHXAL4020-221ME5.81 / 6.4018.716.8VCMA-0420-R22-M-1A5.0 / 5.618.512.0
1.0 µHXAL4020-102ME13.25 / 14.608.79.6VCMA-0420-1R0-M-1A19.5 / 24.07.56.5
1.2 µHXAL4020-122ME17.75 / 19.507.99.0VCMA-0420-1R2-M-1A22.0 / 27.07.06.2
1.5 µHXAL4020-152ME21.45 / 23.607.17.5VCMA-0420-1R5-M-1A25.0 / 30.06.54.8
2.2 µHXAL4020-222ME35.20 / 38.705.65.5VCMA-0420-2R2-M-1A42.0 / 50.05.54.2

Coilcraft Isat is the current for a 30% (typ) inductance drop; MAZO Isat is for an approximately 30% drop. Coilcraft Irms and MAZO Idc are the currents for a 40 °C temperature rise from 25 °C ambient. XAL4020 0.40 µH and 0.60 µH have no same-value VCMA-0420 part; MAZO offers 0.33, 0.47, 0.56 and 0.68 µH.

Series-level differences

Ratings from the series datasheets
ParameterCoilcraft XAL40xxMAZO VCMA-0420
Inductance test1 MHz, 0.1 Vrms, 0 Adc1 MHz, 1.0 V
Operating voltage60 V40 V
Maximum part temperature+165 °C (ambient + rise)125 °C (ambient + rise)
Ambient range−40 °C to +125 °C−55 °C to +125 °C
Package size4.3 × 4.3 × 2.1 mm (XAL40xx family table)4.75 × 4.45 × 2.0 mm maximum
QualificationAEC-Q200AEC-Q200

Key differences

  • Peak and RMS current in your converter against Isat and the heating current.
  • Part temperature: the VCMA-0420 maximum is 125 °C versus 165 °C for the XAL40xx.
  • Voltage across the inductor against the 40 V VCMA-0420 rating.
  • Footprint: compare both recommended land patterns; the body sizes differ.
  • Efficiency and ripple at your switching frequency, measured on the real board.
  • In the MAZO table, the printed MAX current columns are lower than the TYP columns; design to the MAX values.

Step-by-step evaluation

  • List each XAL4020 value on the BOM with the peak and RMS inductor current and the maximum ambient temperature.
  • Pick the VCMA-0420 part with the same nominal inductance from the table above. If there is no same-value part (0.40 µH and 0.60 µH), choose the nearest value only after checking ripple current and loop stability.
  • Compare saturation current with your peak current and the MAZO heating current (Idc) with your RMS current. The VCMA-0420 heating current is lower at every value in the table.
  • Check the voltage across the inductor against the 40 V VCMA-0420 rating and the part temperature (ambient plus rise) against 125 °C.
  • Check DCR losses: at 1.0 µH and above the VCMA-0420 DCR is higher than the XAL4020.
  • Compare the two recommended land patterns; the body is 4.75 × 4.45 mm maximum for the VCMA-0420 versus 4.3 × 4.3 mm for the XAL40xx family table.
  • Build samples on the real board and measure efficiency, temperature rise and ripple before approving the change.

Common reasons a second source fails

  • Heating current: a part that matches Isat can still run hotter because its rated current for a 40 °C rise is lower.
  • High-temperature designs: a board that relies on the 165 °C XAL40xx part temperature limit will not fit within the 125 °C VCMA-0420 limit.
  • Input rails above 40 V across the inductor.
  • Different test conditions: the two datasheets measure inductance at different test voltages, so compare under your own conditions.

Frequently asked questions

Is there a MAZO part that fits XAL4020 pads?

Not with published ratings in the MST catalog. VCMA-0420 and VCMA-0630 both need a new layout because their land patterns are wider.

Which MAZO 0.22 µH inductor handles 16.8 A?

VCMA-0630-R22-M-1A: 24.5 A typ / 24 A max heating current (~40 °C rise) and 40 A typ saturation current, in a 7.3 × 6.8 × 3.0 mm max body.

When is VCMA-0420-R22-M-1A the right choice?

On a new layout at 10 A RMS or less, 40 V or less, with the part kept at or below 125 °C. Its DCR is lower than the XAL4020-221.

Why are the current ratings hard to compare?

Coilcraft gives Irms at 20 °C and 40 °C rise; MAZO gives Idc for about a 40 °C rise, with TYP and MAX columns. Saturation is a 30 % drop in both. Design to the MAZO MAX values.

Is MST the manufacturer?

No. MST is an independent distributor of MAZO parts and is not affiliated with Coilcraft.

Ask an engineer

Send your current part numbers, quantities and operating conditions. MST, as distributor and technical sourcing partner, replies with MAZO candidates, sample availability and pricing.

Ask an engineer

Related pages

Sources

Values are taken from the manufacturer documents above, checked 2026-11-09. Request a quote for current price and availability. MST is a distributor; products are made by the manufacturers named.