MST

SRP1038A-R36M: Bourns 0.36 µH power inductor specs and MAZO candidates to verify

**Short answer:** SRP1038A-R36M is a Bourns SRP1038A-series shielded power inductor: 0.36 µH ±20 % (100 kHz, 1 V), DCR 1.05 mΩ typical / 1.2 mΩ maximum, Irms 31 A, Isat 60 A (20 % inductance drop), body 11.0 × 10.0 × 3.8 mm. Values below are from Bourns' SRP1038A datasheet. Check that document before ordering; it is the reference, not this page.

Key datasheet values (Bourns SRP1038A Series datasheet)

ParameterSRP1038A-R36MCondition / note
Inductance0.36 µH ±20 %@ 100 kHz / 1 V
Q (min.)15@ 100 kHz / 1 V
SRF105 MHz typ
DCR1.05 mΩ typ, 1.2 mΩ max
Irms31 ATemperature rise 40 °C at rated Irms
Isat60 AInductance drops 20 % at Isat
Operating temperature–55 °C to +150 °CTemperature rise included
Storage temperature–55 °C to +150 °C
Dimensions11.0 ±0.5 × 10.0 ±0.3 mm, height 3.8 ±0.2 mm
Core / terminal finishCarbonyl powder core; Sn terminals
QualificationAEC-Q200 compliant; RoHS compliant, halogen free
MSL1
Packaging500 pcs per 13-inch reel
Electrical specifications are at 25 °C. The series spans 0.20 to 47 µH. Bourns shows two terminal styles (non-lead-frame and lead-frame) with separate drawings, so confirm the terminal type and recommended layout for -R36M in the datasheet.

Cross-reference candidates in the MST store (to verify, not equivalents)

Bar charts comparing Bourns SRP1038A-R36M with MAZO LPCA-1040-R36-M and VCMA-1040-R36-M-1A: saturation current 60, 50 and 54 A under different drop definitions, heating current 31, 30 and 32 A, height 3.8, 4.0 and 4.0 mm, and max operating temperature 150, 125 and 125 °C
The MST store lists two MAZO 0.36 µH parts in a similar ~11 × 10 mm class. Values are from the MAZO datasheets linked on each product page:
ParameterBourns SRP1038A-R36MMAZO [LPCA-1040-R36-M](/store/mazo-power-inductors/LPCA-1040-R36-M)MAZO [VCMA-1040-R36-M-1A](/store/mazo-power-inductors/VCMA-1040-R36-M-1A)
Inductance0.36 µH ±20 % @ 100 kHz, 1 V0.36 µH ±20 % @ 1 MHz, 1.0 V0.36 µH ±20 % @ 1 MHz, 1.0 V
DCR typ / max1.05 / 1.2 mΩ1.05 / 1.2 mΩ0.95 / 1.2 mΩ
Saturation current60 A (20 % drop)50 A typ (about 30 % drop)54 A typ, 50 A max column (about 30 % drop)
Heating current31 A (40 °C rise)30 A typ (about 40 °C rise)32 A typ, 30 A max column (about 40 °C rise)
Size11.0 × 10.0 × 3.8 mm11.5 × 10.3 × 4.0 mm max11.5 × 10.3 × 4.0 mm max
Operating temperature–55 to +150 °C–55 to +125 °C–55 to +125 °C
AEC-Q200YesNot statedYes
What this shows:
  • **Not equivalent on the datasheets.** The saturation currents use different definitions (20 % vs about 30 % drop), so 60 A vs 50/54 A cannot be compared directly. Inductance is tested at different frequencies.
  • **The MAZO parts are larger and taller** (4.0 mm max vs 3.8 ±0.2 mm), and their maximum operating temperature is lower (125 °C vs 150 °C). Check height clearance, land pattern and thermal margin.
  • DCR maxima match (1.2 mΩ), and the heating currents are in the same range at a similar 40 °C rise.
Interchangeability has **not** been established. These are candidates to verify on your board, under your current waveform and temperature.

What to send in an RFQ

1. Full part number (SRP1038A-R36M), quantity, and whether full reels are required. 2. Genuine Bourns only, or open to an alternative for evaluation. 3. If an alternative is acceptable: peak and RMS current, switching frequency, ambient temperature, height limit and land pattern.
*Bourns is a trademark of Bourns, Inc. Names and part numbers are used for identification only. MST is not affiliated with or endorsed by Bourns.*

Original OEM documents (links only)

1. Bourns, "SRP1038A Series – Shielded Power Inductors" datasheet (electrical table, dimensions, recommended layout, packaging). https://www.bourns.com/docs/Product-Datasheets/SRP1038A.pdf 2. MAZO LPCA-1040 datasheet, revision A1 (manufacturer document on the store product page). https://store.mst-sg.com/storefront/mazo-datasheets/LPCA-1040/MAZO-LPCA-1040-datasheet-A1.pdf 3. MAZO VCMA-1040 datasheet, revision A2 (manufacturer document on the store product page). https://store.mst-sg.com/storefront/mazo-datasheets/VCMA-1040/MAZO-VCMA-1040-datasheet-A2.pdf

Request a quote

Need SRP1038A-R36M or want a MAZO candidate sampled for evaluation? Post a [find-part request](/community/new?kind=part_request&mpn=SRP1038A-R36M) or send a [sourcing RFQ](/services/sourcing-rfq?sourcing_mode=supplier_match). MST replies in the thread or by email. MST does not claim stock of SRP1038A-R36M; sourcing is done on request.
型番

返信 (0)

まだ返信はありません。