MST
RFQ cartCart

Morisz MPF506W vs Chemraz 513: four O-ring size candidates and material checks

Need a part from this thread? Let MST find it

This thread is attached to your request. Add the part, your email and quantity; no account needed.

Can't find this part? We'll source it

Send us the part number and quantity. An MST engineer will source it, check that it fits your application, and reply with a quote.

Can Morisz MPF506W replace a Chemraz seal? The supplier has proposed four size candidates, but dimensions alone do not establish interchangeability. Use this guide to prepare a sample evaluation and a precise enquiry. MPF506W is a different grade identifier from MPF506UP.

Supplier-proposed size mapping

Original part referenceCandidateID × CS (mm)
9210-SC513MPF506W AS568-21018.64 × 3.53
9326-SC513MPF506W AS568-32640.64 × 5.33
9223-SC513MPF506W AS568-22340.87 × 3.53
9220-SC520MPF506W AS568-22034.52 × 3.53
The original-part-to-size mapping is a supplier proposal, not an OEM-approved cross-reference. Parker confirms the nominal AS568 dimensions; verify the original label, controlled drawing, tolerances and groove. AS568-326 and AS568-223 have similar inside diameters but different cross-sections and are not interchangeable on that basis.

Read the material data with the test conditions

PropertyMorisz MPF506WChemraz 513
ColourWhiteWhite
Reported temperature range−10 to 250 °C−30 to 210 °C
Hardness as labelled75; Shore A / ASTM D141580 Shore A; button specimen
Tensile strength (MPa)1611.032
Elongation (%)218165
Stress at 100% elongation (MPa)5.67.239
Compression set / conditions18%; 200 °C / 70 h; deflection not stated25%; 204 °C / 70 h / 25%
These are supplier test examples or typical values, not a common head-to-head test or finished-part guarantees. The lower temperature endpoint differs. Tensile values alone do not predict seal life, and different compression-set temperatures and incomplete deflection details prevent a direct performance ranking.
The MPF506W table labels hardness as Shore A but lists ASTM D1415, an IRHD method. Clarify the method and specimen before comparing it with Shore A data.

What the oxygen-plasma test actually reports

The second page reports ICP direct exposure: O2 50 sccm; pressure 500 mt (source notation); 800 W; 13.56 MHz; 1 h; 80–120 °C; weight loss 0.67 wt%. There is no Chemraz result under the same conditions in these documents. This one test does not establish performance in other gases, particle cleanliness, long-term tool life or service at the full material temperature limit.

Why the remaining grade needs a separate check

The proposal for 9220-SC520 requires separate evaluation. The historical Chemraz 520 sheet (2005) reports 90 Shore A, −30 to 240 °C and a focus on higher sealing loads. This is historical context, not a current purchase specification. Verify the current material requirement, load and groove before considering the MPF506W candidate.

Prepare the quotation and evaluation

Send the original part number, quantity by size, drawing or groove details, media, actual temperature, pressure/vacuum, static/dynamic duty and destination. Agree sample fit, leak-rate, cleanliness and life acceptance criteria for the application. If the requirement is original manufacturer only, retain that requirement and request the original part.

Source documents and related guidance

View or download the exact supplied PDFs in the original-source cards below. Supplier PDF: undated, two pages; Original manufacturer PDF: August 2018.

Original sources

Supplier-provided Morisz MPF506W technical datasheet

MORISEAL / Morisz · Undated supplier copy; no revision printed · ZH

Cited pages: p. 1p. 2

Archive details

Archived: 2026-11-12 · 2 pages · 420.5 KiB

SHA-256: cf84784bd7fed1a14651b387350537b453f21535c9253903cb2cc24429e8ff95

Chemraz 513 technical datasheet — retained August 2018 copy

Greene Tweed DS-US-SC-168 · 2018-08 supplied copy; original issue month · EN

Cited pages: p. 1

Archive details

Archived: 2026-11-12 · 1 pages · 420.9 KiB

SHA-256: 89c6431ccec50730f9e371e240773b45482b5b4ee255f0f9f74f3b349821b90a

Parts

Replies (0)

No replies yet.

Can't find this part? We'll source it

Send us the part number and quantity. An MST engineer will source it, check that it fits your application, and reply with a quote.