AS568-012 O-ring: size, FKM vs FFKM and quote
Short answer: an AS568-012 O-ring has an inside diameter of 0.364 ± 0.005 in (9.25 ± 0.13 mm) and a cross-section of 0.070 ± 0.003 in (1.78 ± 0.08 mm). MST lists it as request-for-quote items in FKM 75A and FFKM. The two compounds can share this dash size; the choice follows temperature, chemistry and whether the seal sees plasma.
The tables below give the dimensions from SAE AS568B Table 1 (midpoints and tolerances agree with the Boyd size chart and the Parker O-Ring Handbook) and a material comparison taken only from published manufacturer literature. Neighbouring dash numbers -011 and -013 help confirm you have the right size.
AS568-012 dimensions
| Parameter | Inch | Millimetre |
|---|---|---|
| Inside diameter (ID) | 0.364 ± 0.005 | 9.25 ± 0.13 |
| Cross-section (CS) | 0.070 ± 0.003 | 1.78 ± 0.08 |
| Outside diameter (reference, ID + 2 × CS) | 0.504 | 12.81 |
Inch and millimetre values are the midpoints and half-ranges of the min/max limits in SAE AS568B Table 1 (ID 0.359–0.369 in / 9.12–9.37 mm; CS 0.067–0.073 in / 1.70–1.85 mm). The same midpoints appear in the Boyd AS568 size chart and the Parker O-Ring Handbook ORD 5700. Outside diameter is a reference only (ID + 2 × CS).
Neighbouring sizes: -011, -012 and -013
The 0xx series keeps the 0.070 in (1.78 mm) cross-section and steps the inside diameter. A neighbouring dash number is a different ring, not a tolerance variant of the -012.
| AS568 size | Inside diameter | Cross-section |
|---|---|---|
| -011 | 0.301 ± 0.005 in (7.65 ± 0.13 mm) | 0.070 ± 0.003 in (1.78 ± 0.08 mm) |
| -012 | 0.364 ± 0.005 in (9.25 ± 0.13 mm) | 0.070 ± 0.003 in (1.78 ± 0.08 mm) |
| -013 | 0.426 ± 0.005 in (10.82 ± 0.13 mm) | 0.070 ± 0.003 in (1.78 ± 0.08 mm) |
Midpoints and tolerances from SAE AS568B Table 1 min/max limits, in agreement with the Boyd AS568 size chart.
FKM vs FFKM for this size
An FKM ring and an FFKM ring in AS568-012 are the same size; the compound is a separate choice. The statements below are taken from manufacturer literature already cited on MST buying guides. No process-specific fit (for example a named CVD step) is claimed unless a manufacturer names that process for a named grade.
| Topic | FKM (fluoroelastomer) | FFKM (perfluoroelastomer) |
|---|---|---|
| Temperature | Parker gives a general FKM service range of about −26 to +205 °C | Published FFKM grades go higher; examples already listed by MST include Chemraz 513 up to 210 °C and Morisz 6880SP 0–315 °C (manufacturer data). Test methods differ by manufacturer |
| Chemical / plasma resistance | Typical for general vacuum and gas-line fittings at moderate temperature, away from plasma | FFKM plasma grades are used where seals see plasma radicals or aggressive chemistry that shorten FKM life |
| Cleanliness | Usual choice where particle, outgassing or metal-content limits are not the driver | Some FFKM grades are published as high-purity or for processes where particles, outgassing or metal content matter |
| Typical semiconductor use | General vacuum and gas-line fittings at moderate temperature, away from plasma | Chamber lid, gas inlet, window and slit-valve seals in plasma tools (locations described in the DuPont Kalrez plasma selector guide) |
| Relative cost band | Lower cost band of the two | Higher cost band than FKM; no list prices — the quote states the grade and price |
Sources: Parker O-Ring Handbook ORD 5700; DuPont Kalrez semiconductor plasma product selector guide; Greene Tweed Chemraz literature; Precision Polymer Engineering high-purity grade descriptions; Morisz / Chemraz 513 temperatures as published in the MST AS568 catalog. Do not treat temperature limits from different manufacturers as if they were measured the same way.
Morisz manufacturer customization
- MST sells Morisz (MORISEAL) as a catalog brand, not as a customer name, and lists Morisz FFKM grades for quotation in standard AS568 sizes.
- AS568-012 in a Morisz grade can be made to order by Morisz (manufacturer customization) for the dash size and material grade; hardness follows the published grade on the quote (for example 65, 75 or 80 Shore A depending on the grade).
- Some FFKM grades mould slightly off the AS568 nominal because of shrinkage; ask for the molded dimensions when the fit is critical.
- Small quantities for qualification are accepted; the quote states the grade, quantity and lead time.
Request a quote or a custom size
- Choose FKM 75A or FFKM on this page and open the quote form. The part number AS568-012 and the selected material are prefilled; entry source is the product page.
- Enter your email and quantity. Add process temperature, chemistry and the grade you use now if the seal goes into a process tool.
- For a non-standard size, grade or hardness, use the custom request link to the sourcing form.
Frequently asked questions
What is the size of an AS568-012 O-ring?
Inside diameter 0.364 ± 0.005 in (9.25 ± 0.13 mm) and cross-section 0.070 ± 0.003 in (1.78 ± 0.08 mm), from the min/max limits in SAE AS568B Table 1. The reference outside diameter is 0.504 in (12.81 mm).
Is Parker 2-012 the same as AS568-012?
Yes. 2-012 is the common shorthand for the AS568-012 dash size.
Should I choose FKM or FFKM for AS568-012?
Use FKM when the seal stays within the compound temperature limit and is away from plasma. Use an FFKM plasma or high-purity grade when the seal sees higher temperature, plasma radicals or aggressive chemistry, or when particles and outgassing matter. MST lists both as request-for-quote items in this dash size.
Can Morisz make a custom AS568-012?
Yes. An AS568-012 in a Morisz grade can be made to order by Morisz (manufacturer customization) for size and material grade; hardness follows the published grade. Send the size, grade and quantity through the quote form or the custom request link.
Does MST publish a price for AS568-012?
No. Both the FKM 75A and FFKM listings are request-for-quote items. The quote states the grade, price and lead time.
Request a quote
Choose FKM 75A or FFKM, then request a quote. The form is prefilled with AS568-012 and the selected material. For a non-standard size or grade, use the custom request link.
Related pages
Sources
- SAE AS568, Aerospace Size Standard for O-Rings
- AS568B Table 1, Aerospace Size Standards for O-Rings (published copy)
- Boyd AS568 O-Ring size chart
- Parker O-Ring Handbook ORD 5700
- DuPont Kalrez semiconductor plasma product selector guide (KZE-A40111-00-A0422)
- Greene Tweed, Chemraz FFKM overview
Values are taken from the manufacturer documents above, checked 2026-11-10. Request a quote for current price and availability. MST is a distributor; products are made by the manufacturers named.