Empty IC packages for prototype assembly
An empty (pre-molded or air-cavity) IC package lets you attach and wire-bond your own die without a full molding line. It is the usual route for MPW samples, sensor and MEMS prototypes, and engineering samples that must fit a standard socket or PCB footprint.
The packages listed on MST Store are available in plastic air-cavity QFN and HTCC ceramic formats.
Plastic air-cavity vs ceramic
| Family | Construction | Typical use |
|---|---|---|
| Plastic air-cavity QFN (ALNP) | LCP plastic body, copper lead frame, nickel-gold plating; JEDEC MO-220 outlines; sealed with a ceramic or plastic lid by adhesive | Fast prototypes and engineering samples that do not need hermetic sealing |
| Ceramic QFN (CQFN / ALNC) | HTCC multilayer ceramic | Prototypes requiring a review of sealing and reliability requirements |
| CSOP small ceramic packages | HTCC ceramic | Small-outline ceramic prototypes |
| CSMD power packages | HTCC ceramic | Power devices |
| Cavity BGA and CQFP | Cavity package | High pin-count prototypes (144 to 512 I/O) |
The manufacturer states that its plastic air-cavity packages do not meet military-grade hermeticity. Ceramic material alone does not establish a hermetic assembly: confirm the package, lid, sealing process and required leak-test criteria.
Sizes listed on MST Store
| Part number | Type | Body size |
|---|---|---|
| ALNP-16-3-5 | Plastic air-cavity QFN16 | 3 × 3 mm |
| ALNP-24-4-5 | Plastic air-cavity QFN24 | 4 × 4 mm |
| ALNP-32-5-5 | Plastic air-cavity QFN32 | 5 × 5 mm |
| ALNP-48-7-5 | LCP QFN48, 0.5 mm pitch, 5.2 × 5.2 mm die-attach area, 0.65 mm cavity depth | 7 × 7 mm, 0.85 mm thick |
| ALNP-64-9-5H | Plastic air-cavity QFN64 | 9 × 9 mm |
| ALNP-100-12-4H | Plastic air-cavity QFN100 | 12 × 12 mm |
| ALNC-48-7-5C | HTCC ceramic QFN48 | 7 × 7 mm |
| CSOP-14 | HTCC CSOP ceramic | 16.80 × 15.50 mm |
| BGA1313-256BALLS | Cavity BGA, 256 balls | 13 × 13 mm |
| BGA2020-512BALLS | Cavity BGA, 512 balls | 20 × 20 mm |
More than 40 sizes are listed in the catalogue. Request a quote.
How to choose
- Die size plus bonding clearance must fit the cavity or die-attach area.
- Pin count and pitch must match the test socket or PCB footprint you plan to use.
- For hermetic requirements, ask for a compatible package/lid/sealing process and the required verification; do not approve from the ceramic material label alone.
- Plan the lid: ceramic, metal or plastic lids are available for these packages.
Will the die, wire bonds and lid fit?
| Requirement | What to compare | Evidence to request |
|---|---|---|
| Die placement | Die length and width with tolerances against the usable die-attach area | Cavity and die-attach drawing with assembly clearances |
| Vertical clearance | Die thickness, attach layer, wire-loop envelope and lid underside | An assembled section with a common height datum and tolerances |
| Electrical connections | Required independent signals, power and ground against bond pads and external terminals | Bond-pad map, routing/net map and proposed bond diagram |
| Lid and seal | Lid seating area, adhesive or seal geometry, opening and environmental requirement | Matching lid drawing, sealing process and agreed inspection or leak test |
Ball count is not a substitute for the connection map. Confirm which terminals are usable for your design and which are shared, reserved or unconnected.
Check the full height stack
A die can fit in plan view while its wire loops interfere with the lid. Compare the highest assembled feature with the lowest permitted lid underside using the same drawing datum. Include die-attach thickness, wire-loop variation, lid seating and package tolerances. If cavity depth and lid height use different datums, ask for a section before subtracting the numbers.
KYOCERA describes cavity structures with wire-bond shelves and lists different hermetic and non-hermetic sealing options. These are design choices to confirm for the selected package; they do not certify a catalogue candidate for your assembly.
What to send with a package RFQ
- Die length, width and thickness; pad count, required I/O and a non-confidential bond-pad layout.
- Preferred package type, body size and pitch.
- Hermetic or non-hermetic requirement and lid type.
- Quantity and whether you need empty bodies only, matched lids, die attach, wire bonding, sealing or test.
- Known assembly limits, test temperature, target date and delivery country. Unknown details can be listed for follow-up.
Frequently asked questions
What is an empty IC package?
A finished package body with leads or balls and an open cavity, supplied without a die. You attach and wire-bond your own die, then seal it with a lid.
Are plastic air-cavity QFN packages hermetic?
The manufacturer states its plastic cavity packages do not meet military-grade hermeticity. If hermetic sealing is required, confirm a suitable package, lid and sealing process plus the specified leak test. Choosing HTCC ceramic alone is not confirmation.
Is a 256-ball package enough for 128 required I/O?
The ball count alone cannot answer that. Check the bond-pad and routing map for independent usable connections, power and ground assignments, shared nets and unconnected terminals, then review the proposed bond diagram.
Do the QFN packages follow a JEDEC outline?
The manufacturer lists its plastic air-cavity QFN packages as standardized to JEDEC MO-220.
Can I request assembly and test as well?
Yes. Use the packaging and test RFQ to describe die attach, wire bonding and test needs; MST reviews the scope and replies with options.
Package your prototype dies
Send a non-confidential die outline, thickness, required I/O, package preference and quantity. MST reviews the missing inputs and supplier options for a scoped quote.
Request a packaging quoteRelated pages
Sources
- Plastic air-cavity package catalogue
- Package product catalogue
- KYOCERA, cavity structure and wire-bond shelf
- KYOCERA, hermetic and non-hermetic sealing options
Values are taken from the manufacturer documents above, checked 2026-11-03. Request a quote for current price and availability. MST is a distributor; products are made by the manufacturers named.