MAZO 0.1 µH shielded power inductor, Idc 15 A typ.
- Inductance
- 0.1 µH
- Isat
- 22 A
- Idc
- 15 A
- DCR max
- 4 mΩ
- Brand
- MAZO
- Series
- VCMA-0420
- Size
- 4.75 × 4.45 × 2 mm
- Category
- MAZO power inductors
- Related applications
- Automotive / OBC
- Features
- AEC-Q200Magnetic shieldRoHSHalogen free
- Stock
- Factory stock
Specifications
Datasheet facts
- Recommended land pattern
- Two 2.5 × 1.5 mm pads, 2.2 mm apart, 5.2 mm overall
- Inductance test condition
- 1 MHz, 1.0 V, 25 °C
- Current definitions
- Isat: inductance drops about 30%; Idc: temperature rise about 40 °C
- Soldering
- Reflow per J-STD-020
- Operating temperature (ambient + self-heating)
- -55 ~ +125 °C
- Storage temperature
- -55 ~ +125 °C
- Packaging
- 3000 pieces per reel; tape pocket 4.5±0.1 × 4.8±0.1 × 2.5±0.15 mm
Datasheet VCMA-0420-XXX-M-1A, revision A4, 2025-11-26, page 4
Characteristic curves
Typical curves from the MAZO datasheet, for reference only.
Soldering and packaging
Alternative to these parts
VCMA-0420-R10-M-1A matches the parts below in footprint class and nominal value. Check the pads and test samples before switching.
| Brand | Part number | L | Isat | Irms | DCR max | Size | Footprint | Recommended pads | VCMA-0420-R10-M-1A vs. this part |
|---|---|---|---|---|---|---|---|---|---|
| Bourns | SRP4020TA-R10YSRP4020TA | 0.1 µH | 35 A · 20% | 12 A · 40 °C | 4 mΩ | 4.45 × 4.06 × 2 mm | Pad-compatible | 2.4 × 1.5 mm, gap 2.2 mmSame as MAZO | Weaker figures |
| Vishay | IHLP1616BZERR10M01IHLP-1616BZ-01 | 0.1 µH | 35 A · 20% | 16 A · 40 °C | 5 mΩ | 4.06 × 4.45 × 2 mm | Pad-compatible | 2.286 × 1.855 mm, gap 1.93 mmClose to MAZO (0.439 mm off) | Weaker figures |
| Cyntec | VCHA042A-R10MS62MVCHA042A MS62M | 0.1 µH | 25 A · 30% | 21 A · 40 °C | 2.28 mΩ | 4.2 × 4 × 2.1 mm | Same footprint class | 2.286 × 1.855 mm, gap 1.93 mmClose to MAZO (0.439 mm off) | Weaker figures |
What each comparison means (3)
- Bourns SRP4020TA-R10Y: Same inductance, 0.1 µH vs MAZO 0.1 µH. Saturation current 35 A (20% drop) vs MAZO 22 A typ. (30% drop), rated on different bases so not directly comparable; heating current 12 A (40 °C rise) vs MAZO 15 A typ. (40 °C rise). DCR 4 mΩ max vs MAZO 4 mΩ max. Body 4.45 × 4.06 × 2 mm vs MAZO 4.75 × 4.45 × 2 mm. Same land pattern as MAZO (two 2.5 × 1.5 mm pads 2.2 mm apart). Verdict: MAZO figures are weaker, consider only with ample margin (Idc not lower at 40 °C rise, DCR equal). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise and test samples. Both parts are AEC-Q200.
- Vishay IHLP1616BZERR10M01 (IHLP-1616BZ-01): Same inductance, 0.1 µH vs MAZO 0.1 µH. Saturation current 35 A (20% drop) vs MAZO 22 A typ. (30% drop), rated on different bases so not directly comparable; heating current 16 A (40 °C rise) vs MAZO 15 A typ. (40 °C rise). DCR 5 mΩ max vs MAZO 4 mΩ max. Body 4.06 × 4.45 × 2 mm vs MAZO 4.75 × 4.45 × 2 mm. Land pattern close to MAZO's: two 2.286 × 1.855 mm pads 1.93 mm apart vs MAZO two 2.5 × 1.5 mm pads 2.2 mm apart (overall span differs by 0.439 mm). Verdict: MAZO figures are weaker, consider only with ample margin (Idc about 6% lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples.
- Cyntec VCHA042A-R10MS62M (VCHA042A MS62M): Same inductance, 0.1 µH vs MAZO 0.1 µH. Saturation current 25 A (30% drop) vs MAZO 22 A typ. (30% drop); heating current 21 A (40 °C rise) vs MAZO 15 A typ. (40 °C rise). DCR 2.28 mΩ max vs MAZO 4 mΩ max. Body 4.2 × 4 × 2.1 mm vs MAZO 4.75 × 4.45 × 2 mm, MAZO 0.1 mm lower. Land pattern close to MAZO's: two 2.286 × 1.855 mm pads 1.93 mm apart vs MAZO two 2.5 × 1.5 mm pads 2.2 mm apart (overall span differs by 0.439 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 12% lower, Idc about 29% lower at 40 °C rise, DCR slightly higher). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
How the figures are compared
Isat and Irms follow each datasheet's own definition, shown after the figure. MAZO figures are typical values from its spec table.
Recommended pads: pad width × pad length, then the gap between the two pads, from each datasheet, compared with MAZO's.
Same footprint, other values
Same 4.75 × 4.45 mm body, by inductance. Check the height before swapping.
| Part number | L | Isat | Idc | DCR max | Height | Unit price |
|---|---|---|---|---|---|---|
| VCMA-0420-R22-M-1A | 0.22 µH | 18.5 A | 12 A | 5.6 mΩ | 2 mm | $0.21 |
| VCMA-0420-R33-M-1A | 0.33 µH | 16 A | 10 A | 8 mΩ | 2 mm | $0.21 |
| VCMA-0420-R47-M-1A | 0.47 µH | 12 A | 8.5 A | 12 mΩ | 2 mm | $0.22 |
| VCMA-0420-R56-M-1A | 0.56 µH | 10.5 A | 8 A | 13 mΩ | 2 mm | $0.28 |
| VCMA-0420-R68-M-1A | 0.68 µH | 9 A | 7.5 A | 14 mΩ | 2 mm | $0.28 |
| VCMA-0420-1R0-M-1A | 1 µH | 7.5 A | 6.5 A | 24 mΩ | 2 mm | $0.28 |
| VCMA-0420-1R2-M-1A | 1.2 µH | 7 A | 6.2 A | 27 mΩ | 2 mm | $0.28 |
| VCMA-0420-1R5-M-1A | 1.5 µH | 6.5 A | 4.8 A | 30 mΩ | 2 mm | $0.28 |
| VCMA-0420-2R2-M-1A | 2.2 µH | 5.5 A | 4.2 A | 50 mΩ | 2 mm | $0.21 |
| VCMA-0420-3R3-M-1A | 3.3 µH | 4.5 A | 3.3 A | 82 mΩ | 2 mm | $0.23 |
| VCMA-0420-4R7-M-1A | 4.7 µH | 3.3 A | 2.5 A | 105 mΩ | 2 mm | $0.33 |
| VCMA-0420-6R8-M-1A | 6.8 µH | 2.6 A | 2 A | 185 mΩ | 2 mm | $0.36 |
Buy
| Quantity | Unit price | Extended |
|---|---|---|
| 5–49 | $0.21 | $1.05 |
| 50–149 | $0.16 | $8.00 |
| 150–499 | $0.121 | $18.15 |
| 500–2999 | $0.1 | $50.00 |
- Minimum order
- 5 pieces
- Order multiple
- 1 piece
- Availability
- Factory stock
- Dispatch preparation
- 2 days
Dispatch preparation and shipping transit are separate. Arrival is estimated; the confirmed route and shipment tracking determine delivery.
- Standard full-reel quantity
- 3000 pieces
- Packed as
- Cut tape · 5 pieces
- Cut-tape fee
- None
- Online order limit
- 2999 pieces
Packaging and handling charges are shown in the cart. Shipping, duties and tax are confirmed separately.
Add this quantity to your cart to review order charges and the available payment steps. Sign in if prompted.
Selection and use
How to select
Choosing inductance
L ≈ (Vin − Vout) × Vout ÷ (Vin × fsw × ΔI), with ΔI at 20–40% of the output current. The series covers 0.1–10 µH in one body, so changing the value needs no new layout.
Saturation current Isat
the current at which inductance falls about 30%; keep the peak current below it.
Heating current Idc
the current that raises the part about 40 °C above a 25 °C ambient; ambient plus rise stays within 125 °C.
DC resistance
sets the conduction loss. Typical 3.5–245 mΩ across the series; use the maximum for loss budgets.
Rated voltage
40 V maximum; check it against the input voltage.
Height
Max 2.0 mm. For more current, VCMA-0530 or VCMA-0630.
Industry and product applications
VCMA-0420-R10-M-1A is a VCMA-0420 series part for evaluation in automotive electronics.
Manufacturer-listed series applications
Automotive applications.
MAZO datasheet: VCMA-0420-XXX-M-1A, revision A4, 2025-11-26 — applications on page 1
Circuit applications to evaluate
These are series applications and engineering evaluation examples. Select VCMA-0420-R10-M-1A against the required inductance, peak and RMS current, switching frequency, temperature rise and PCB footprint. Inclusion here does not establish suitability for a particular design or qualification of the finished product.