VCMA-0530-R68-M-1A
MAZO 0.68 µH shielded power inductor, Idc 9 A typ.
- Inductance
- 0.68 µH
- Isat
- 15 A
- Idc
- 9 A
- DCR max
- 9.8 mΩ
- Brand
- MAZO
- Series
- VCMA-0530
- Size
- 5.7 × 5.4 × 3 mm
- Category
- MAZO power inductors
- Related applications
- Automotive / OBC
- Features
- AEC-Q200Magnetic shieldRoHSHalogen free
- Stock
- Factory stock
Manufacturer series image
Specifications
Inductance L00.68 µH ±20% (1 MHz, 1.0 V)
DCR typ.8.5 mΩ
DCR max.9.8 mΩ
Heating current Idc typ.9 A
Heating current Idc max.8.5 A
Saturation current Isat typ.15 A
Saturation current Isat max.14 A
Rated voltage max.50 V
Package5.7 × 5.4 × 3.0 mm max
Operating temperature-55 °C to +125 °C (ambient plus self-temperature rise)
Magnetic constructionMagnetically shielded, low EMI
QualificationAEC-Q200 qualified; RoHS compliant; halogen free
Packaging2000 pieces/reel
ApplicationsAutomotive applications
BrandMAZO / Mazotech
Datasheet facts
- Recommended land pattern
- Two 2.5 × 1.9 mm pads, 2.2 mm apart, 6 mm overall
- Inductance test condition
- 1 MHz, 1.0 V, 25 °C
- Current definitions
- Isat: inductance drops about 30%; Idc: temperature rise about 40 °C
- Soldering
- Reflow per J-STD-020
- Operating temperature (ambient + self-heating)
- -55 ~ +125 °C
- Storage temperature
- -55 ~ +125 °C
- Packaging
- 2000 pieces per reel; tape pocket 5.7±0.10 × 5.9±0.10 × 3.3±0.15 mm
Datasheet VCMA-0530-XXX-M-1A, revision A2, 2025-11-26, page 4
Characteristic curves
Typical curves from the MAZO datasheet, for reference only.
Soldering and packaging
Alternative to these parts
VCMA-0530-R68-M-1A matches the parts below in footprint class and nominal value. Check the pads and test samples before switching.
| Brand | Part number | L | Isat | Irms | DCR max | Size | Footprint | Recommended pads | VCMA-0530-R68-M-1A vs. this part |
|---|---|---|---|---|---|---|---|---|---|
| TDK | SPM5030T-R68M-HZSPM5030T-HZ | 0.68 µH | 8.9 A · 20% | 13.6 A · 40 °C | 7.37 mΩ | 5.2 × 5 × 3 mm | Pad-compatible | 2.2 × 1.5 mm, gap 2.7 mmClose to MAZO (0.5 mm off) | Weaker figures |
| Bourns | SRP5030TA-R68MSRP5030TA | 0.68 µH | 14 A · 20% | 8.5 A · 40 °C | 12 mΩ | 5.7 × 5.3 × 3 mm | Same footprint class | 1.8 × 2 mm, gap 2.5 mmDiffers from MAZO (0.7 mm off) | Figures qualify; check the pads |
| Cyntec | VCMT053T-R68MN52MVCMT053T MN52M | 0.68 µH | 11.7 A · 20% | 11.3 A · 40 °C | 9.74 mΩ | 5.45 × 5.25 × 3 mm | Same footprint class | 2.79 × 1.905 mm, gap 2.946 mmDiffers from MAZO (0.756 mm off) | With margin; check the pads |
| Vishay | IHLP2020CZERR68M01IHLP-2020CZ-01 | 0.68 µH | 13.5 A · 20% | 10.2 A · 40 °C | 8.96 mΩ | 5.18 × 5.49 × 3 mm | Same footprint class | 2.79 × 1.905 mm, gap 2.946 mmDiffers from MAZO (0.756 mm off) | With margin; check the pads |
| Würth Elektronik | 744373360068WE-LHMI 5030 | 0.68 µH | 19.3 A · 30% | 9.8 A · 40 °C | 12 mΩ | 5.7 × 5.2 × 3 mm | Same footprint class | 1.8 × 2 mm, gap 2.5 mmDiffers from MAZO (0.7 mm off) | With margin; check the pads |
| Würth Elektronik | 744393340068WE-XHMI 5030 | 0.68 µH | 17.7 A · 30% | 15.7 A · 40 °C | 4.88 mΩ | 5.55 × 5.35 × 3 mm | Same footprint class | 4.8 × 1.3 mm, gap 2.05 mmDiffers from MAZO (2.3 mm off) | Weaker figures |
What each comparison means (6)
- TDK SPM5030T-R68M-HZ (SPM5030T-HZ): Same inductance, 0.68 µH vs MAZO 0.68 µH. Saturation current 8.9 A (20% drop) vs MAZO 15 A typ. (30% drop), rated on different bases so not directly comparable; heating current 13.6 A (40 °C rise) vs MAZO 9 A typ. (40 °C rise). DCR 7.37 mΩ max vs MAZO 9.8 mΩ max. Body 5.2 × 5 × 3 mm vs MAZO 5.7 × 5.4 × 3 mm. Land pattern close to MAZO's: two 2.2 × 1.5 mm pads 2.7 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (gap differs by 0.5 mm). Verdict: MAZO figures are weaker, consider only with ample margin (Idc about 34% lower at 40 °C rise, DCR slightly higher). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Bourns SRP5030TA-R68M: Same inductance, 0.68 µH vs MAZO 0.68 µH. Saturation current 14 A (20% drop) vs MAZO 15 A typ. (30% drop), rated on different bases so not directly comparable; heating current 8.5 A (40 °C rise) vs MAZO 9 A typ. (40 °C rise). DCR 12 mΩ max vs MAZO 9.8 mΩ max. Body 5.7 × 5.3 × 3 mm vs MAZO 5.7 × 5.4 × 3 mm. Land pattern differs from MAZO's: two 1.8 × 2 mm pads 2.5 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (pad width differs by 0.7 mm). Verdict: the figures qualify, but the pads need checking (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Cyntec VCMT053T-R68MN52M (VCMT053T MN52M): Same inductance, 0.68 µH vs MAZO 0.68 µH. Saturation current 11.7 A (20% drop) vs MAZO 15 A typ. (30% drop), rated on different bases so not directly comparable; heating current 11.3 A (40 °C rise) vs MAZO 9 A typ. (40 °C rise). DCR 9.74 mΩ max vs MAZO 9.8 mΩ max. Body 5.45 × 5.25 × 3 mm vs MAZO 5.7 × 5.4 × 3 mm. Land pattern differs from MAZO's: two 2.79 × 1.905 mm pads 2.946 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (overall span differs by 0.756 mm). Verdict: replaceable with design margin, pads need checking (Idc about 20% lower at 40 °C rise, DCR slightly higher). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Vishay IHLP2020CZERR68M01 (IHLP-2020CZ-01): Same inductance, 0.68 µH vs MAZO 0.68 µH. Saturation current 13.5 A (20% drop) vs MAZO 15 A typ. (30% drop), rated on different bases so not directly comparable; heating current 10.2 A (40 °C rise) vs MAZO 9 A typ. (40 °C rise). DCR 8.96 mΩ max vs MAZO 9.8 mΩ max. Body 5.18 × 5.49 × 3 mm vs MAZO 5.7 × 5.4 × 3 mm. Land pattern differs from MAZO's: two 2.79 × 1.905 mm pads 2.946 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (overall span differs by 0.756 mm). Verdict: replaceable with design margin, pads need checking (Idc about 12% lower at 40 °C rise, DCR slightly higher). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples.
- Würth Elektronik 744373360068 (WE-LHMI 5030): Same inductance, 0.68 µH vs MAZO 0.68 µH. Saturation current 19.3 A (30% drop) vs MAZO 15 A typ. (30% drop); heating current 9.8 A (40 °C rise) vs MAZO 9 A typ. (40 °C rise). DCR 12 mΩ max vs MAZO 9.8 mΩ max. Body 5.7 × 5.2 × 3 mm vs MAZO 5.7 × 5.4 × 3 mm. Land pattern differs from MAZO's: two 1.8 × 2 mm pads 2.5 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (pad width differs by 0.7 mm). Verdict: replaceable with design margin, pads need checking (MAZO Isat about 22% lower, Idc about 8% lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples.
- Würth Elektronik 744393340068 (WE-XHMI 5030): Same inductance, 0.68 µH vs MAZO 0.68 µH. Saturation current 17.7 A (30% drop) vs MAZO 15 A typ. (30% drop); heating current 15.7 A (40 °C rise) vs MAZO 9 A typ. (40 °C rise). DCR 4.88 mΩ max vs MAZO 9.8 mΩ max. Body 5.55 × 5.35 × 3 mm vs MAZO 5.7 × 5.4 × 3 mm. Land pattern differs from MAZO's: two 4.8 × 1.3 mm pads 2.05 mm apart vs MAZO two 2.5 × 1.9 mm pads 2.2 mm apart (pad width differs by 2.3 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 15% lower, Idc about 43% lower at 40 °C rise, DCR slightly higher). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
How the figures are compared
Isat and Irms follow each datasheet's own definition, shown after the figure. MAZO figures are typical values from its spec table.
Recommended pads: pad width × pad length, then the gap between the two pads, from each datasheet, compared with MAZO's.
Same footprint, other values
Same 5.7 × 5.4 mm body, by inductance. Check the height before swapping.
| Part number | L | Isat | Idc | DCR max | Height | Unit price |
|---|---|---|---|---|---|---|
| VCMA-0530-R33-M-1A | 0.33 µH | 19 A | 16 A | 5 mΩ | 3 mm | $0.29 |
| VCMA-0530-R47-M-1A | 0.47 µH | 18 A | 10 A | 8.5 mΩ | 3 mm | $0.30 |
| VCMA-0530-1R0-M-1A | 1 µH | 11 A | 8.5 A | 13 mΩ | 3 mm | $0.30 |
| VCMA-0530-1R5-M-1A | 1.5 µH | 10 A | 8 A | 18 mΩ | 3 mm | $0.30 |
| VCMA-0530-2R2-M-1A | 2.2 µH | 8.5 A | 5.5 A | 26 mΩ | 3 mm | $0.30 |
| VCMA-0530-3R3-M-1A | 3.3 µH | 7.5 A | 4.8 A | 37 mΩ | 3 mm | $0.27 |
| VCMA-0530-4R7-M-1A | 4.7 µH | 5.5 A | 3.5 A | 58 mΩ | 3 mm | $0.30 |
| VCMA-0530-6R8-M-1A | 6.8 µH | 4 A | 3 A | 90 mΩ | 3 mm | $0.33 |
| VCMA-0530-100-M-1A | 10 µH | 3 A | 2.5 A | 125 mΩ | 3 mm | $0.20 |
Same value, other sizes
Smallest first. A larger body usually carries more current; the pads differ.
| Part number | L | Isat | Idc | DCR max | Body | Unit price |
|---|---|---|---|---|---|---|
| VCMA-0420-R68-M-1A | 0.68 µH | 9 A | 7.5 A | 14 mΩ | 4.75 × 4.45 × 2 mm | $0.28 |
| VCMA-0630-R68-M-1A | 0.68 µH | 18 A | 16 A | 5.3 mΩ | 7.3 × 6.8 × 3 mm | $0.30 |
| VCMA-1040-R68-M-1A | 0.68 µH | 32 A | 23 A | 2.4 mΩ | 11.5 × 10.3 × 4 mm | $0.52 |
| VCMA-1350-R68-M-1A | 0.68 µH | 60 A | 35 A | 1.35 mΩ | 13.8 × 12.9 × 5 mm | $0.75 |
Buy
Unit price · USD / piece$0.30For 5 pieces
Quantity pricingSelect a tier to set the quantity.
| Quantity | Unit price | Extended |
|---|---|---|
| 5–49 | $0.3 | $1.50 |
| 50–149 | $0.22 | $11.00 |
| 150–499 | $0.182 | $27.30 |
| 500–2999 | $0.14 | $70.00 |
Merchandise subtotal$1.50Item amount only; excludes packaging, handling, shipping, duties and tax. Packaging and handling charges are shown in the cart. Shipping, duties and tax are confirmed separately.
- Minimum order
- 5 pieces
- Order multiple
- 1 piece
- Availability
- Factory stock
- Dispatch preparation
- 2 days
Ships from ChinaShipping: DHL ExpressChoose a delivery country to see the transit estimate.
Dispatch preparation and shipping transit are separate. Arrival is estimated; the confirmed route and shipment tracking determine delivery.
PackagingFor the selected quantity
- Standard full-reel quantity
- 2000 pieces
- Packed as
- Cut tape · 5 pieces
- Cut-tape fee
- None
- Online order limit
- 2999 pieces
Packaging and handling charges are shown in the cart. Shipping, duties and tax are confirmed separately.
Add this quantity to your cart to review order charges and the available payment steps. Sign in if prompted.
Selection and use
How to select
Choosing inductance
L ≈ (Vin − Vout) × Vout ÷ (Vin × fsw × ΔI), with ΔI at 20–40% of the output current. The series covers 0.33–10 µH in one body, so changing the value needs no new layout.
Saturation current Isat
the current at which inductance falls about 30%; keep the peak current below it.
Heating current Idc
the current that raises the part about 40 °C above a 25 °C ambient; ambient plus rise stays within 125 °C.
DC resistance
sets the conduction loss. Typical 4.5–110 mΩ across the series; use the maximum for loss budgets.
Rated voltage
50 V maximum; check it against the input voltage.
Height
Max 3.0 mm. Lower: VCMA-0420; same height, more current: VCMA-0630.
Industry and product applications
VCMA-0530-R68-M-1A is a VCMA-0530 series part for evaluation in automotive electronics.
Manufacturer-listed series applications
Automotive applications.
MAZO datasheet: VCMA-0530-XXX-M-1A, revision A2, 2025-11-26 — applications on page 1
Circuit applications to evaluate
These are series applications and engineering evaluation examples. Select VCMA-0530-R68-M-1A against the required inductance, peak and RMS current, switching frequency, temperature rise and PCB footprint. Inclusion here does not establish suitability for a particular design or qualification of the finished product.