MST
询价清单购物车
AS568 O-rings

AS568-012 O-ring: size, FKM vs FFKM and quote

Short answer: an AS568-012 O-ring has an inside diameter of 0.364 ± 0.005 in (9.25 ± 0.13 mm) and a cross-section of 0.070 ± 0.003 in (1.78 ± 0.08 mm). MST lists it as request-for-quote items in FKM 75A and FFKM. The two compounds can share this dash size; the choice follows temperature, chemistry and whether the seal sees plasma.

The tables below give the dimensions from SAE AS568B Table 1 (midpoints and tolerances agree with the Boyd size chart and the Parker O-Ring Handbook) and a material comparison taken only from published manufacturer literature. Neighbouring dash numbers -011 and -013 help confirm you have the right size.

AS568-012 dimensions

SAE AS568-012 nominal dimensions and tolerances
ParameterInchMillimetre
Inside diameter (ID)0.364 ± 0.0059.25 ± 0.13
Cross-section (CS)0.070 ± 0.0031.78 ± 0.08
Outside diameter (reference, ID + 2 × CS)0.50412.81

Inch and millimetre values are the midpoints and half-ranges of the min/max limits in SAE AS568B Table 1 (ID 0.359–0.369 in / 9.12–9.37 mm; CS 0.067–0.073 in / 1.70–1.85 mm). The same midpoints appear in the Boyd AS568 size chart and the Parker O-Ring Handbook ORD 5700. Outside diameter is a reference only (ID + 2 × CS).

Neighbouring sizes: -011, -012 and -013

The 0xx series keeps the 0.070 in (1.78 mm) cross-section and steps the inside diameter. A neighbouring dash number is a different ring, not a tolerance variant of the -012.

AS568-011, -012 and -013 (same cross-section)
AS568 sizeInside diameterCross-section
-0110.301 ± 0.005 in (7.65 ± 0.13 mm)0.070 ± 0.003 in (1.78 ± 0.08 mm)
-0120.364 ± 0.005 in (9.25 ± 0.13 mm)0.070 ± 0.003 in (1.78 ± 0.08 mm)
-0130.426 ± 0.005 in (10.82 ± 0.13 mm)0.070 ± 0.003 in (1.78 ± 0.08 mm)

Midpoints and tolerances from SAE AS568B Table 1 min/max limits, in agreement with the Boyd AS568 size chart.

FKM vs FFKM for this size

An FKM ring and an FFKM ring in AS568-012 are the same size; the compound is a separate choice. The statements below are taken from manufacturer literature already cited on MST buying guides. No process-specific fit (for example a named CVD step) is claimed unless a manufacturer names that process for a named grade.

FKM and FFKM compared from published manufacturer literature
TopicFKM (fluoroelastomer)FFKM (perfluoroelastomer)
TemperatureParker gives a general FKM service range of about −26 to +205 °CPublished FFKM grades go higher; examples already listed by MST include Chemraz 513 up to 210 °C and Morisz 6880SP 0–315 °C (manufacturer data). Test methods differ by manufacturer
Chemical / plasma resistanceTypical for general vacuum and gas-line fittings at moderate temperature, away from plasmaFFKM plasma grades are used where seals see plasma radicals or aggressive chemistry that shorten FKM life
CleanlinessUsual choice where particle, outgassing or metal-content limits are not the driverSome FFKM grades are published as high-purity or for processes where particles, outgassing or metal content matter
Typical semiconductor useGeneral vacuum and gas-line fittings at moderate temperature, away from plasmaChamber lid, gas inlet, window and slit-valve seals in plasma tools (locations described in the DuPont Kalrez plasma selector guide)
Relative cost bandLower cost band of the twoHigher cost band than FKM; no list prices — the quote states the grade and price

Sources: Parker O-Ring Handbook ORD 5700; DuPont Kalrez semiconductor plasma product selector guide; Greene Tweed Chemraz literature; Precision Polymer Engineering high-purity grade descriptions; Morisz / Chemraz 513 temperatures as published in the MST AS568 catalog. Do not treat temperature limits from different manufacturers as if they were measured the same way.

Morisz manufacturer customization

  • MST sells Morisz (MORISEAL) as a catalog brand, not as a customer name, and lists Morisz FFKM grades for quotation in standard AS568 sizes.
  • AS568-012 in a Morisz grade can be made to order by Morisz (manufacturer customization) for the dash size and material grade; hardness follows the published grade on the quote (for example 65, 75 or 80 Shore A depending on the grade).
  • Some FFKM grades mould slightly off the AS568 nominal because of shrinkage; ask for the molded dimensions when the fit is critical.
  • Small quantities for qualification are accepted; the quote states the grade, quantity and lead time.

Request a quote or a custom size

  • Choose FKM 75A or FFKM on this page and open the quote form. The part number AS568-012 and the selected material are prefilled; entry source is the product page.
  • Enter your email and quantity. Add process temperature, chemistry and the grade you use now if the seal goes into a process tool.
  • For a non-standard size, grade or hardness, use the custom request link to the sourcing form.

Frequently asked questions

What is the size of an AS568-012 O-ring?

Inside diameter 0.364 ± 0.005 in (9.25 ± 0.13 mm) and cross-section 0.070 ± 0.003 in (1.78 ± 0.08 mm), from the min/max limits in SAE AS568B Table 1. The reference outside diameter is 0.504 in (12.81 mm).

Is Parker 2-012 the same as AS568-012?

Yes. 2-012 is the common shorthand for the AS568-012 dash size.

Should I choose FKM or FFKM for AS568-012?

Use FKM when the seal stays within the compound temperature limit and is away from plasma. Use an FFKM plasma or high-purity grade when the seal sees higher temperature, plasma radicals or aggressive chemistry, or when particles and outgassing matter. MST lists both as request-for-quote items in this dash size.

Can Morisz make a custom AS568-012?

Yes. An AS568-012 in a Morisz grade can be made to order by Morisz (manufacturer customization) for size and material grade; hardness follows the published grade. Send the size, grade and quantity through the quote form or the custom request link.

Does MST publish a price for AS568-012?

No. Both the FKM 75A and FFKM listings are request-for-quote items. The quote states the grade, price and lead time.

Request a quote

Choose FKM 75A or FFKM, then request a quote. The form is prefilled with AS568-012 and the selected material. For a non-standard size or grade, use the custom request link.

Related pages

Sources

Values are taken from the manufacturer documents above, checked 2026-11-10. Request a quote for current price and availability. MST is a distributor; products are made by the manufacturers named.