VCMA-0630-1R0-M-1A
MAZO 1 µH shielded power inductor, Idc 13.5 A typ.
- Inductance
- 1 µH
- Isat
- 15.5 A
- Idc
- 13.5 A
- DCR max
- 7.4 mΩ
- Brand
- MAZO
- Series
- VCMA-0630
- Size
- 7.3 × 6.8 × 3 mm
- Category
- MAZO power inductors
- Related applications
- Automotive / OBC
- Features
- AEC-Q200Magnetic shieldRoHSHalogen free
- Stock
- Factory stock
Manufacturer series image
Specifications
Inductance L01 µH ±20% (1 MHz, 1.0 V)
DCR typ.6.7 mΩ
DCR max.7.4 mΩ
Heating current Idc typ.13.5 A
Heating current Idc max.13 A
Saturation current Isat typ.15.5 A
Saturation current Isat max.15 A
Rated voltage max.75 V
Package7.3 × 6.8 × 3.0 mm max
Operating temperature-55 °C to +125 °C (ambient plus self-temperature rise)
Magnetic constructionMagnetically shielded, low EMI
QualificationAEC-Q200 qualified; RoHS compliant; halogen free
Packaging1500 pieces/reel
ApplicationsAutomotive applications
BrandMAZO / Mazotech
Datasheet facts
- Recommended land pattern
- Two 3.5 × 2.35 mm pads, 3.7 mm apart, 8.4 mm overall
- Inductance test condition
- 1 MHz, 1.0 V, 25 °C
- Current definitions
- Isat: inductance drops about 30%; Idc: temperature rise about 40 °C
- Soldering
- Reflow per J-STD-020
- Operating temperature (ambient + self-heating)
- -55 ~ +125 °C
- Storage temperature
- -55 ~ +125 °C
- Packaging
- 1500 pieces per reel; tape pocket 7.2±0.10 × 7.5±0.10 × 3.6±0.15 mm
Datasheet VCMA-0630-XXX-M-1A, revision A2, 2025-11-26, page 4
Characteristic curves
Typical curves from the MAZO datasheet, for reference only.
Soldering and packaging
Alternative to these parts
VCMA-0630-1R0-M-1A matches the parts below in footprint class and nominal value. Check the pads and test samples before switching.
| Brand | Part number | L | Isat | Irms | DCR max | Size | Footprint | Recommended pads | VCMA-0630-1R0-M-1A vs. this part |
|---|---|---|---|---|---|---|---|---|---|
| Cyntec | VCMT063T-1R0MN5TMVCMT063T MN5TM | 1 µH | 13 A · 20% | 13 A · 40 °C | 7.8 mΩ | 6.95 × 6.6 × 2.8 mm | Pad-compatible | 3.429 × 2.413 mm, gap 3.429 mmClose to MAZO (0.271 mm off) | Drop-in candidate |
| Vishay | IHLP2525CZER1R0M5AIHLP-2525CZ-5A | 1 µH | 13 A · 20% | 12 A · 40 °C | 8.45 mΩ | 6.86 × 6.47 × 3 mm | Pad-compatible | 3.429 × 2.413 mm, gap 3.429 mmClose to MAZO (0.271 mm off) | Drop-in candidate |
| Cyntec | VCMV063T-1R0MN2TMVCMV063T MN2TM / MN2T | 1 µH | 22 A · 20% | 11.6 A · 40 °C | 11 mΩ | 6.95 × 6.6 × 2.8 mm | Pad-compatible | 3.429 × 2.413 mm, gap 3.429 mmClose to MAZO (0.271 mm off) | Weaker figures |
| Vishay | IHLP2525CZER1R0M01IHLP-2525CZ-01 | 1 µH | 22 A · 20% | 11 A · 40 °C | 10 mΩ | 6.86 × 6.47 × 3 mm | Pad-compatible | 3.429 × 2.413 mm, gap 3.429 mmClose to MAZO (0.271 mm off) | Weaker figures |
| TDK | SPM6530T-1R0M-HZSPM6530T-HZ | 1 µH | 13.2 A · 20% | 14.4 A · 40 °C | 7.81 mΩ | 7.1 × 6.5 × 3 mm | Same footprint class | 3.4 × 1.85 mm, gap 3.7 mmDiffers from MAZO (1 mm off) | Figures qualify; check the pads |
| TDK | SPM6530T-1R0M120SPM6530T | 1 µH | 14.1 A · 20% | 13 A · 40 °C | 7.81 mΩ | 7.1 × 6.5 × 3 mm | Same footprint class | 3.4 × 1.85 mm, gap 3.7 mmDiffers from MAZO (1 mm off) | Figures qualify; check the pads |
| Coilcraft | XEL6030-102MECXEL6030 | 1 µH | 18 A · 30% | 16 A · 40 °C | 6.95 mΩ | 6.36 × 6.56 × 3.1 mm | Same footprint class | 5.5 × 1.43 mm, gap 2.61 mmDiffers from MAZO (2.93 mm off) | With margin; check the pads |
| Bourns | SRP6030CA-1R0MSRP6030CA | 1 µH | 23 A · 30% | 18 A · 40 °C | 6.05 mΩ | 6.6 × 6.4 × 2.8 mm | Same footprint class | 5.6 × 1.55 mm, gap 2.5 mmDiffers from MAZO (2.8 mm off) | Weaker figures |
| Bourns | SRP6530A-1R0MSRP6530A | 1 µH | 25 A · 30% | 12 A · 40 °C | 10 mΩ | 7.1 × 6.6 × 3 mm | Same footprint class | 3.4 × 1.85 mm, gap 3.7 mmDiffers from MAZO (1 mm off) | Weaker figures |
| Coilcraft | XAL6030-102MECXAL6030 | 1 µH | 23 A · 30% | 18 A · 40 °C | 6.18 mΩ | 6.36 × 6.56 × 3.1 mm | Same footprint class | 5.5 × 1.43 mm, gap 2.61 mmDiffers from MAZO (2.93 mm off) | Weaker figures |
| Coilcraft | XGL6030-102MECXGL6030 | 1 µH | 17.7 A · 30% | 18.1 A · 40 °C | 4.9 mΩ | 6.51 × 6.71 × 3.1 mm | Same footprint class | 5.5 × 1.43 mm, gap 2.61 mmDiffers from MAZO (2.93 mm off) | Weaker figures |
| Würth Elektronik | 74437346010WE-LHMI 7030 | 1 µH | 29 A · 30% | 11.4 A · 40 °C | 10 mΩ | 7.3 × 6.6 × 3 mm | Same footprint class | 3.5 × 2.95 mm, gap 2.5 mmDiffers from MAZO (1.2 mm off) | Weaker figures |
| Würth Elektronik | 74438377010WE-MAPI 6030 | 1 µH | 19.5 A · 30% | 16.6 A · 40 °C | 5.6 mΩ | 6.6 × 6.6 × 3.1 mm | Same footprint class | 6.9 × 2.15 mm, gap 2.6 mmDiffers from MAZO (3.4 mm off) | Weaker figures |
| Würth Elektronik | 74439344010WE-XHMI 6030 | 1 µH | 24.95 A · 30% | 12 A · 40 °C | 6.05 mΩ | 6.65 × 6.45 × 3 mm | Same footprint class | 5.5 × 1.45 mm, gap 2.55 mmDiffers from MAZO (2.95 mm off) | Weaker figures |
What each comparison means (14)
- Cyntec VCMT063T-1R0MN5TM (VCMT063T MN5TM): Same inductance, 1 µH vs MAZO 1 µH. Saturation current 13 A (20% drop) vs MAZO 15.5 A typ. (30% drop), rated on different bases so not directly comparable; heating current 13 A (40 °C rise) vs MAZO 13.5 A typ. (40 °C rise). DCR 7.8 mΩ max vs MAZO 7.4 mΩ max. Body 6.95 × 6.6 × 2.8 mm vs MAZO 7.3 × 6.8 × 3 mm, MAZO 0.2 mm taller. Land pattern close to MAZO's: two 3.429 × 2.413 mm pads 3.429 mm apart vs MAZO two 3.5 × 2.35 mm pads 3.7 mm apart (gap differs by 0.271 mm). Verdict: drop-in candidate (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Vishay IHLP2525CZER1R0M5A (IHLP-2525CZ-5A): Same inductance, 1 µH vs MAZO 1 µH. Saturation current 13 A (20% drop) vs MAZO 15.5 A typ. (30% drop), rated on different bases so not directly comparable; heating current 12 A (40 °C rise) vs MAZO 13.5 A typ. (40 °C rise). DCR 8.45 mΩ max vs MAZO 7.4 mΩ max. Body 6.86 × 6.47 × 3 mm vs MAZO 7.3 × 6.8 × 3 mm. Land pattern close to MAZO's: two 3.429 × 2.413 mm pads 3.429 mm apart vs MAZO two 3.5 × 2.35 mm pads 3.7 mm apart (gap differs by 0.271 mm). Verdict: drop-in candidate (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Cyntec VCMV063T-1R0MN2TM (VCMV063T MN2TM / MN2T): Same inductance, 1 µH vs MAZO 1 µH. Saturation current 22 A (20% drop) vs MAZO 15.5 A typ. (30% drop), rated on different bases so not directly comparable; heating current 11.6 A (40 °C rise) vs MAZO 13.5 A typ. (40 °C rise). DCR 11 mΩ max vs MAZO 7.4 mΩ max. Body 6.95 × 6.6 × 2.8 mm vs MAZO 7.3 × 6.8 × 3 mm, MAZO 0.2 mm taller. Land pattern close to MAZO's: two 3.429 × 2.413 mm pads 3.429 mm apart vs MAZO two 3.5 × 2.35 mm pads 3.7 mm apart (gap differs by 0.271 mm). Verdict: MAZO figures are weaker, consider only with ample margin (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Vishay IHLP2525CZER1R0M01 (IHLP-2525CZ-01): Same inductance, 1 µH vs MAZO 1 µH. Saturation current 22 A (20% drop) vs MAZO 15.5 A typ. (30% drop), rated on different bases so not directly comparable; heating current 11 A (40 °C rise) vs MAZO 13.5 A typ. (40 °C rise). DCR 10 mΩ max vs MAZO 7.4 mΩ max. Body 6.86 × 6.47 × 3 mm vs MAZO 7.3 × 6.8 × 3 mm. Land pattern close to MAZO's: two 3.429 × 2.413 mm pads 3.429 mm apart vs MAZO two 3.5 × 2.35 mm pads 3.7 mm apart (gap differs by 0.271 mm). Verdict: MAZO figures are weaker, consider only with ample margin (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples.
- TDK SPM6530T-1R0M-HZ (SPM6530T-HZ): Same inductance, 1 µH vs MAZO 1 µH. Saturation current 13.2 A (20% drop) vs MAZO 15.5 A typ. (30% drop), rated on different bases so not directly comparable; heating current 14.4 A (40 °C rise) vs MAZO 13.5 A typ. (40 °C rise). DCR 7.81 mΩ max vs MAZO 7.4 mΩ max. Body 7.1 × 6.5 × 3 mm vs MAZO 7.3 × 6.8 × 3 mm. Land pattern differs from MAZO's: two 3.4 × 1.85 mm pads 3.7 mm apart vs MAZO two 3.5 × 2.35 mm pads 3.7 mm apart (overall span differs by 1 mm). Verdict: the figures qualify, but the pads need checking (Idc about 6% lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- TDK SPM6530T-1R0M120: Same inductance, 1 µH vs MAZO 1 µH. Saturation current 14.1 A (20% drop) vs MAZO 15.5 A typ. (30% drop), rated on different bases so not directly comparable; heating current 13 A (40 °C rise) vs MAZO 13.5 A typ. (40 °C rise). DCR 7.81 mΩ max vs MAZO 7.4 mΩ max. Body 7.1 × 6.5 × 3 mm vs MAZO 7.3 × 6.8 × 3 mm. Land pattern differs from MAZO's: two 3.4 × 1.85 mm pads 3.7 mm apart vs MAZO two 3.5 × 2.35 mm pads 3.7 mm apart (overall span differs by 1 mm). Verdict: the figures qualify, but the pads need checking (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples.
- Coilcraft XEL6030-102MEC: Same inductance, 1 µH vs MAZO 1 µH. Saturation current 18 A (30% drop) vs MAZO 15.5 A typ. (30% drop); heating current 16 A (40 °C rise) vs MAZO 13.5 A typ. (40 °C rise). DCR 6.95 mΩ max vs MAZO 7.4 mΩ max. Body 6.36 × 6.56 × 3.1 mm vs MAZO 7.3 × 6.8 × 3 mm, MAZO 0.1 mm lower. Land pattern differs from MAZO's: two 5.5 × 1.43 mm pads 2.61 mm apart vs MAZO two 3.5 × 2.35 mm pads 3.7 mm apart (overall span differs by 2.93 mm). Verdict: replaceable with design margin, pads need checking (MAZO Isat about 14% lower, Idc about 16% lower at 40 °C rise, DCR slightly higher). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Bourns SRP6030CA-1R0M: Same inductance, 1 µH vs MAZO 1 µH. Saturation current 23 A (30% drop) vs MAZO 15.5 A typ. (30% drop); heating current 18 A (40 °C rise) vs MAZO 13.5 A typ. (40 °C rise). DCR 6.05 mΩ max vs MAZO 7.4 mΩ max. Body 6.6 × 6.4 × 2.8 mm vs MAZO 7.3 × 6.8 × 3 mm, MAZO 0.2 mm taller. Land pattern differs from MAZO's: two 5.6 × 1.55 mm pads 2.5 mm apart vs MAZO two 3.5 × 2.35 mm pads 3.7 mm apart (overall span differs by 2.8 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 33% lower, Idc about 25% lower at 40 °C rise, DCR slightly higher). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Bourns SRP6530A-1R0M: Same inductance, 1 µH vs MAZO 1 µH. Saturation current 25 A (30% drop) vs MAZO 15.5 A typ. (30% drop); heating current 12 A (40 °C rise) vs MAZO 13.5 A typ. (40 °C rise). DCR 10 mΩ max vs MAZO 7.4 mΩ max. Body 7.1 × 6.6 × 3 mm vs MAZO 7.3 × 6.8 × 3 mm. Land pattern differs from MAZO's: two 3.4 × 1.85 mm pads 3.7 mm apart vs MAZO two 3.5 × 2.35 mm pads 3.7 mm apart (overall span differs by 1 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 38% lower, Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Coilcraft XAL6030-102MEC: Same inductance, 1 µH vs MAZO 1 µH. Saturation current 23 A (30% drop) vs MAZO 15.5 A typ. (30% drop); heating current 18 A (40 °C rise) vs MAZO 13.5 A typ. (40 °C rise). DCR 6.18 mΩ max vs MAZO 7.4 mΩ max. Body 6.36 × 6.56 × 3.1 mm vs MAZO 7.3 × 6.8 × 3 mm, MAZO 0.1 mm lower. Land pattern differs from MAZO's: two 5.5 × 1.43 mm pads 2.61 mm apart vs MAZO two 3.5 × 2.35 mm pads 3.7 mm apart (overall span differs by 2.93 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 33% lower, Idc about 25% lower at 40 °C rise, DCR slightly higher). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Coilcraft XGL6030-102MEC: Same inductance, 1 µH vs MAZO 1 µH. Saturation current 17.7 A (30% drop) vs MAZO 15.5 A typ. (30% drop); heating current 18.1 A (40 °C rise) vs MAZO 13.5 A typ. (40 °C rise). DCR 4.9 mΩ max vs MAZO 7.4 mΩ max. Body 6.51 × 6.71 × 3.1 mm vs MAZO 7.3 × 6.8 × 3 mm, MAZO 0.1 mm lower. Land pattern differs from MAZO's: two 5.5 × 1.43 mm pads 2.61 mm apart vs MAZO two 3.5 × 2.35 mm pads 3.7 mm apart (overall span differs by 2.93 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 12% lower, Idc about 25% lower at 40 °C rise, DCR slightly higher). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Würth Elektronik 74437346010 (WE-LHMI 7030): Same inductance, 1 µH vs MAZO 1 µH. Saturation current 29 A (30% drop) vs MAZO 15.5 A typ. (30% drop); heating current 11.4 A (40 °C rise) vs MAZO 13.5 A typ. (40 °C rise). DCR 10 mΩ typ vs MAZO 6.7 mΩ typ. Body 7.3 × 6.6 × 3 mm vs MAZO 7.3 × 6.8 × 3 mm. Land pattern differs from MAZO's: two 3.5 × 2.95 mm pads 2.5 mm apart vs MAZO two 3.5 × 2.35 mm pads 3.7 mm apart (gap differs by 1.2 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 47% lower, Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples.
- Würth Elektronik 74438377010 (WE-MAPI 6030): Same inductance, 1 µH vs MAZO 1 µH. Saturation current 19.5 A (30% drop) vs MAZO 15.5 A typ. (30% drop); heating current 16.6 A (40 °C rise) vs MAZO 13.5 A typ. (40 °C rise). DCR 5.6 mΩ max vs MAZO 7.4 mΩ max. Body 6.6 × 6.6 × 3.1 mm vs MAZO 7.3 × 6.8 × 3 mm, MAZO 0.1 mm lower. Land pattern differs from MAZO's: two 6.9 × 2.15 mm pads 2.6 mm apart vs MAZO two 3.5 × 2.35 mm pads 3.7 mm apart (pad width differs by 3.4 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 21% lower, Idc about 19% lower at 40 °C rise, DCR slightly higher). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Würth Elektronik 74439344010 (WE-XHMI 6030): Same inductance, 1 µH vs MAZO 1 µH. Saturation current 24.95 A (30% drop) vs MAZO 15.5 A typ. (30% drop); heating current 12 A (40 °C rise) vs MAZO 13.5 A typ. (40 °C rise). DCR 6.05 mΩ max vs MAZO 7.4 mΩ max. Body 6.65 × 6.45 × 3 mm vs MAZO 7.3 × 6.8 × 3 mm. Land pattern differs from MAZO's: two 5.5 × 1.45 mm pads 2.55 mm apart vs MAZO two 3.5 × 2.35 mm pads 3.7 mm apart (overall span differs by 2.95 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 38% lower, Idc not lower at 40 °C rise, DCR slightly higher). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
How the figures are compared
Isat and Irms follow each datasheet's own definition, shown after the figure. MAZO figures are typical values from its spec table.
Recommended pads: pad width × pad length, then the gap between the two pads, from each datasheet, compared with MAZO's.
Same footprint, other values
Same 7.3 × 6.8 mm body, by inductance. Check the height before swapping.
| Part number | L | Isat | Idc | DCR max | Height | Unit price |
|---|---|---|---|---|---|---|
| VCMA-0630-R22-M-1A | 0.22 µH | 40 A | 24.5 A | 3 mΩ | 3 mm | $0.30 |
| VCMA-0630-R24-M-1A | 0.24 µH | 32 A | 23.5 A | 3.1 mΩ | 3 mm | $0.30 |
| VCMA-0630-R33-M-1A | 0.33 µH | 27 A | 21.5 A | 3.5 mΩ | 3 mm | $0.30 |
| VCMA-0630-R36-M-1A | 0.36 µH | 26 A | 20 A | 3.7 mΩ | 3 mm | $0.30 |
| VCMA-0630-R47-M-1A | 0.47 µH | 22 A | 19 A | 4.1 mΩ | 3 mm | $0.30 |
| VCMA-0630-R56-M-1A | 0.56 µH | 19 A | 18 A | 4.5 mΩ | 3 mm | $0.30 |
| VCMA-0630-R68-M-1A | 0.68 µH | 18 A | 16 A | 5.3 mΩ | 3 mm | $0.30 |
| VCMA-0630-R82-M-1A | 0.82 µH | 17 A | 14.5 A | 6 mΩ | 3 mm | $0.23 |
| VCMA-0630-1R5-M-1A | 1.5 µH | 14.5 A | 12 A | 11 mΩ | 3 mm | $0.23 |
| VCMA-0630-2R2-M-1A | 2.2 µH | 12.5 A | 9.5 A | 15 mΩ | 3 mm | $0.23 |
| VCMA-0630-5R6-M-1A | 5.6 µH | 6.5 A | 5.5 A | 42 mΩ | 3 mm | $0.33 |
| VCMA-0630-6R8-M-1A | 6.8 µH | 6 A | 5 A | 48 mΩ | 3 mm | $0.30 |
Same value, other sizes
Smallest first. A larger body usually carries more current; the pads differ.
| Part number | L | Isat | Idc | DCR max | Body | Unit price |
|---|---|---|---|---|---|---|
| VCMA-0420-1R0-M-1A | 1 µH | 7.5 A | 6.5 A | 24 mΩ | 4.75 × 4.45 × 2 mm | $0.28 |
| VCMA-0530-1R0-M-1A | 1 µH | 11 A | 8.5 A | 13 mΩ | 5.7 × 5.4 × 3 mm | $0.30 |
| VCMA-1040-1R0-M-1A | 1 µH | 29 A | 19 A | 3.1 mΩ | 11.5 × 10.3 × 4 mm | $0.52 |
| VCMA-1350-1R0-M-1A | 1 µH | 39.5 A | 26 A | 2 mΩ | 13.8 × 12.9 × 5 mm | $0.75 |
| VCMA-1365-1R0-M-1A | 1 µH | 43 A | 38 A | 1.9 mΩ | 13.8 × 12.9 × 6.5 mm | $0.79 |
Buy
Unit price · USD / piece$0.24For 5 pieces
Quantity pricingSelect a tier to set the quantity.
| Quantity | Unit price | Extended |
|---|---|---|
| 5–49 | $0.24 | $1.20 |
| 50–149 | $0.17 | $8.50 |
| 150–499 | $0.136 | $20.40 |
Merchandise subtotal$1.20Item amount only; excludes packaging, handling, shipping, duties and tax. Packaging and handling charges are shown in the cart. Shipping, duties and tax are confirmed separately.
- Minimum order
- 5 pieces
- Order multiple
- 1 piece
- Availability
- Factory stock
- Dispatch preparation
- 2 days
Ships from ChinaShipping: DHL ExpressChoose a delivery country to see the transit estimate.
Dispatch preparation and shipping transit are separate. Arrival is estimated; the confirmed route and shipment tracking determine delivery.
PackagingFor the selected quantity
- Standard full-reel quantity
- 1500 pieces
- Packed as
- Cut tape · 5 pieces
- Cut-tape fee
- None
- Online order limit
- 499 pieces
Packaging and handling charges are shown in the cart. Shipping, duties and tax are confirmed separately.
Add this quantity to your cart to review order charges and the available payment steps. Sign in if prompted.
Selection and use
How to select
Choosing inductance
L ≈ (Vin − Vout) × Vout ÷ (Vin × fsw × ΔI), with ΔI at 20–40% of the output current. The series covers 0.22–22 µH in one body, so changing the value needs no new layout.
Saturation current Isat
the current at which inductance falls about 30%; keep the peak current below it.
Heating current Idc
the current that raises the part about 40 °C above a 25 °C ambient; ambient plus rise stays within 125 °C.
DC resistance
sets the conduction loss. Typical 2.5–175 mΩ across the series; use the maximum for loss budgets.
Rated voltage
75 V maximum; check it against the input voltage.
Height
Max 3.0 mm. More current: VCMA-1040; lower: VCMA-0420.
Industry and product applications
VCMA-0630-1R0-M-1A is a VCMA-0630 series part for evaluation in automotive electronics.
Manufacturer-listed series applications
Automotive applications.
MAZO datasheet: VCMA-0630-XXX-M-1A, revision A2, 2025-11-26 — applications on page 1
Circuit applications to evaluate
These are series applications and engineering evaluation examples. Select VCMA-0630-1R0-M-1A against the required inductance, peak and RMS current, switching frequency, temperature rise and PCB footprint. Inclusion here does not establish suitability for a particular design or qualification of the finished product.