MAZO 5.6 µH shielded power inductor, Idc 5.5 A typ.
- Inductance
- 5.6 µH
- Isat
- 6.5 A
- Idc
- 5.5 A
- DCR max
- 42 mΩ
- Brand
- MAZO
- Series
- VCMA-0630
- Size
- 7.3 × 6.8 × 3 mm
- Category
- MAZO power inductors
- Related applications
- Automotive / OBC
- Features
- AEC-Q200RoHSHalogen free
- Stock
- Factory stock
Specifications
Datasheet facts
- Recommended land pattern
- Two 3.5 × 2.35 mm pads, 3.7 mm apart, 8.4 mm overall
- Inductance test condition
- 1 MHz, 1.0 V, 25 °C
- Current definitions
- Isat: inductance drops about 30%; Idc: temperature rise about 40 °C
- Soldering
- Reflow per J-STD-020
- Operating temperature (ambient + self-heating)
- -55 ~ +125 °C
- Storage temperature
- -55 ~ +125 °C
- Packaging
- 1500 pieces per reel; tape pocket 7.2±0.10 × 7.5±0.10 × 3.6±0.15 mm
Datasheet VCMA-0630-XXX-M-1A, revision A2, 2025-11-26, page 4
Characteristic curves
Typical curves from the MAZO datasheet, for reference only.
Soldering and packaging
Alternative to these parts
VCMA-0630-5R6-M-1A matches the parts below in footprint class and nominal value. Check the pads and test samples before switching.
| Brand | Part number | L | Isat | Irms | DCR max | Size | Footprint | Recommended pads | VCMA-0630-5R6-M-1A vs. this part |
|---|---|---|---|---|---|---|---|---|---|
| Vishay | IHLP2525CZER5R6M5AIHLP-2525CZ-5A | 5.6 µH | 4.8 A · 20% | 5.3 A · 40 °C | 45.6 mΩ | 6.86 × 6.47 × 3 mm | Pad-compatible | 3.429 × 2.413 mm, gap 3.429 mmClose to MAZO (0.271 mm off) | Drop-in candidate |
| TDK | SPM6530T-5R6M-HZSPM6530T-HZ | 5.6 µH | 5.4 A · 20% | 5.4 A · 40 °C | 41.3 mΩ | 7.1 × 6.5 × 3 mm | Same footprint class | 3.4 × 1.85 mm, gap 3.7 mmDiffers from MAZO (1 mm off) | Figures qualify; check the pads |
| Bourns | SRP6530A-5R6MSRP6530A | 5.6 µH | 10.5 A · 30% | 5.8 A · 40 °C | 60 mΩ | 7.1 × 6.6 × 3 mm | Same footprint class | 3.4 × 1.85 mm, gap 3.7 mmDiffers from MAZO (1 mm off) | Weaker figures |
| Coilcraft | XGL6030-562MECXGL6030 | 5.6 µH | 8.2 A · 30% | 8.8 A · 40 °C | 24.1 mΩ | 6.51 × 6.71 × 3.1 mm | Same footprint class | 5.5 × 1.43 mm, gap 2.61 mmDiffers from MAZO (2.93 mm off) | Weaker figures |
| Würth Elektronik | 74437346056WE-LHMI 7030 | 5.6 µH | 12.1 A · 30% | 5 A · 40 °C | 48 mΩ | 7.3 × 6.6 × 2.8 mm | Same footprint class | 3.5 × 2.95 mm, gap 2.5 mmDiffers from MAZO (1.2 mm off) | Weaker figures |
What each comparison means (5)
- Vishay IHLP2525CZER5R6M5A (IHLP-2525CZ-5A): Same inductance, 5.6 µH vs MAZO 5.6 µH. Saturation current 4.8 A (20% drop) vs MAZO 6.5 A typ. (30% drop), rated on different bases so not directly comparable; heating current 5.3 A (40 °C rise) vs MAZO 5.5 A typ. (40 °C rise). DCR 45.6 mΩ max vs MAZO 42 mΩ max. Body 6.86 × 6.47 × 3 mm vs MAZO 7.3 × 6.8 × 3 mm. Land pattern close to MAZO's: two 3.429 × 2.413 mm pads 3.429 mm apart vs MAZO two 3.5 × 2.35 mm pads 3.7 mm apart (gap differs by 0.271 mm). Verdict: drop-in candidate (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- TDK SPM6530T-5R6M-HZ (SPM6530T-HZ): Same inductance, 5.6 µH vs MAZO 5.6 µH. Saturation current 5.4 A (20% drop) vs MAZO 6.5 A typ. (30% drop), rated on different bases so not directly comparable; heating current 5.4 A (40 °C rise) vs MAZO 5.5 A typ. (40 °C rise). DCR 41.3 mΩ max vs MAZO 42 mΩ max. Body 7.1 × 6.5 × 3 mm vs MAZO 7.3 × 6.8 × 3 mm. Land pattern differs from MAZO's: two 3.4 × 1.85 mm pads 3.7 mm apart vs MAZO two 3.5 × 2.35 mm pads 3.7 mm apart (overall span differs by 1 mm). Verdict: the figures qualify, but the pads need checking (Idc not lower at 40 °C rise, DCR slightly higher). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Bourns SRP6530A-5R6M: Same inductance, 5.6 µH vs MAZO 5.6 µH. Saturation current 10.5 A (30% drop) vs MAZO 6.5 A typ. (30% drop); heating current 5.8 A (40 °C rise) vs MAZO 5.5 A typ. (40 °C rise). DCR 60 mΩ max vs MAZO 42 mΩ max. Body 7.1 × 6.6 × 3 mm vs MAZO 7.3 × 6.8 × 3 mm. Land pattern differs from MAZO's: two 3.4 × 1.85 mm pads 3.7 mm apart vs MAZO two 3.5 × 2.35 mm pads 3.7 mm apart (overall span differs by 1 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 38% lower, Idc about 5% lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Coilcraft XGL6030-562MEC: Same inductance, 5.6 µH vs MAZO 5.6 µH. Saturation current 8.2 A (30% drop) vs MAZO 6.5 A typ. (30% drop); heating current 8.8 A (40 °C rise) vs MAZO 5.5 A typ. (40 °C rise). DCR 24.1 mΩ max vs MAZO 42 mΩ max. Body 6.51 × 6.71 × 3.1 mm vs MAZO 7.3 × 6.8 × 3 mm, MAZO 0.1 mm lower. Land pattern differs from MAZO's: two 5.5 × 1.43 mm pads 2.61 mm apart vs MAZO two 3.5 × 2.35 mm pads 3.7 mm apart (overall span differs by 2.93 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 21% lower, Idc about 38% lower at 40 °C rise, DCR slightly higher). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Würth Elektronik 74437346056 (WE-LHMI 7030): Same inductance, 5.6 µH vs MAZO 5.6 µH. Saturation current 12.1 A (30% drop) vs MAZO 6.5 A typ. (30% drop); heating current 5 A (40 °C rise) vs MAZO 5.5 A typ. (40 °C rise). DCR 48 mΩ max vs MAZO 42 mΩ max. Body 7.3 × 6.6 × 2.8 mm vs MAZO 7.3 × 6.8 × 3 mm, MAZO 0.2 mm taller. Land pattern differs from MAZO's: two 3.5 × 2.95 mm pads 2.5 mm apart vs MAZO two 3.5 × 2.35 mm pads 3.7 mm apart (gap differs by 1.2 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 46% lower, Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples.
How the figures are compared
Isat and Irms follow each datasheet's own definition, shown after the figure. MAZO figures are typical values from its spec table.
Recommended pads: pad width × pad length, then the gap between the two pads, from each datasheet, compared with MAZO's.
Same footprint, other values
Same 7.3 × 6.8 mm body, by inductance. Check the height before swapping.
| Part number | L | Isat | Idc | DCR max | Height | Unit price |
|---|---|---|---|---|---|---|
| VCMA-0630-R33-M-1A | 0.33 µH | 27 A | 21.5 A | 3.5 mΩ | 3 mm | $0.30 |
| VCMA-0630-R36-M-1A | 0.36 µH | 26 A | 20 A | 3.7 mΩ | 3 mm | $0.30 |
| VCMA-0630-R47-M-1A | 0.47 µH | 22 A | 19 A | 4.1 mΩ | 3 mm | $0.30 |
| VCMA-0630-R56-M-1A | 0.56 µH | 19 A | 18 A | 4.5 mΩ | 3 mm | $0.30 |
| VCMA-0630-R68-M-1A | 0.68 µH | 18 A | 16 A | 5.3 mΩ | 3 mm | $0.30 |
| VCMA-0630-R82-M-1A | 0.82 µH | 17 A | 14.5 A | 6 mΩ | 3 mm | $0.23 |
| VCMA-0630-1R0-M-1A | 1 µH | 15.5 A | 13.5 A | 7.4 mΩ | 3 mm | $0.24 |
| VCMA-0630-1R5-M-1A | 1.5 µH | 14.5 A | 12 A | 11 mΩ | 3 mm | $0.23 |
| VCMA-0630-2R2-M-1A | 2.2 µH | 12.5 A | 9.5 A | 15 mΩ | 3 mm | $0.23 |
| VCMA-0630-6R8-M-1A | 6.8 µH | 6 A | 5 A | 48 mΩ | 3 mm | $0.30 |
| VCMA-0630-8R2-M-1A | 8.2 µH | 5.8 A | 4.5 A | 60 mΩ | 3 mm | $0.30 |
| VCMA-0630-100-M-1A | 10 µH | 5.5 A | 4.1 A | 67 mΩ | 3 mm | $0.21 |
Same value, other sizes
Smallest first. A larger body usually carries more current; the pads differ.
| Part number | L | Isat | Idc | DCR max | Body | Unit price |
|---|---|---|---|---|---|---|
| VCMA-1350-5R6-M-1A | 5.6 µH | 20 A | 12 A | 12 mΩ | 13.8 × 12.9 × 5 mm | $0.75 |
| VCMA-1365-5R6-M-1A | 5.6 µH | 22 A | 18 A | 8.2 mΩ | 13.8 × 12.9 × 6.5 mm | $0.90 |
Buy
| Quantity | Unit price | Extended |
|---|---|---|
| 5–49 | $0.33 | $1.65 |
| 50–149 | $0.24 | $12.00 |
| 150–499 | $0.193 | $28.95 |
| 500–2999 | $0.15 | $75.00 |
- Minimum order
- 5 pieces
- Order multiple
- 1 piece
- Availability
- Factory stock
- Dispatch preparation
- 2 days
Dispatch preparation and shipping transit are separate. Arrival is estimated; the confirmed route and shipment tracking determine delivery.
- Standard full-reel quantity
- 1500 pieces
- Packed as
- Cut tape · 5 pieces
- Cut-tape fee
- None
- Online order limit
- 2999 pieces
Packaging and handling charges are shown in the cart. Shipping, duties and tax are confirmed separately.
Add this quantity to your cart to review order charges and the available payment steps. Sign in if prompted.
Selection and use
How to select
Choosing inductance
L ≈ (Vin − Vout) × Vout ÷ (Vin × fsw × ΔI), with ΔI at 20–40% of the output current. The series covers 0.22–22 µH in one body, so changing the value needs no new layout.
Saturation current Isat
the current at which inductance falls about 30%; keep the peak current below it.
Heating current Idc
the current that raises the part about 40 °C above a 25 °C ambient; ambient plus rise stays within 125 °C.
DC resistance
sets the conduction loss. Typical 2.5–175 mΩ across the series; use the maximum for loss budgets.
Rated voltage
75 V maximum; check it against the input voltage.
Height
Max 3.0 mm. More current: VCMA-1040; lower: VCMA-0420.
Industry and product applications
VCMA-0630-5R6-M-1A is a VCMA-0630 series part for evaluation in automotive electronics.
Manufacturer-listed series applications
Automotive applications.
MAZO datasheet: VCMA-0630-XXX-M-1A, revision A2, 2025-11-26 — applications on page 1
Circuit applications to evaluate
These are series applications and engineering evaluation examples. Select VCMA-0630-5R6-M-1A against the required inductance, peak and RMS current, switching frequency, temperature rise and PCB footprint. Inclusion here does not establish suitability for a particular design or qualification of the finished product.