VCMA-1365-5R6-M-1A
MAZO 5.6 µH shielded power inductor, Idc 18 A typ.
- Inductance
- 5.6 µH
- Isat
- 22 A
- Idc
- 18 A
- DCR max
- 8.2 mΩ
- Brand
- MAZO
- Series
- VCMA-1365
- Size
- 13.8 × 12.9 × 6.5 mm
- Category
- MAZO power inductors
- Related applications
- Automotive / OBC
- Features
- AEC-Q200Magnetic shieldRoHSHalogen free
- Stock
- Factory stock
Manufacturer series image
Specifications
BrandMAZO / Mazotech
SeriesVCMA-1365
Inductance L05.6 µH ±20% (1 MHz, 1.0 V)
DCR typ.7.1 mΩ
DCR max.8.2 mΩ
Heating current Idc typ.18 A
Heating current Idc max.17 A
Saturation current Isat typ.22 A
Saturation current Isat max.20 A
Rated voltage max.75 V
Package13.8 × 12.9 × 6.5 mm max
Operating temperature-55 °C to +125 °C (ambient plus self-temperature rise)
Magnetic constructionMagnetically shielded, low EMI
QualificationAEC-Q200 qualified; RoHS compliant; halogen free
Packaging500 pieces/reel
ApplicationsAutomotive applications
Datasheet facts
- Recommended land pattern
- Two 5.5 × 3.25 mm pads, 8 mm apart, 14.5 mm overall
- Inductance test condition
- 1 MHz, 1.0 V, 25 °C
- Current definitions
- Isat: inductance drops about 30%; Idc: temperature rise about 40 °C
- Soldering
- Reflow per J-STD-020
- Operating temperature (ambient + self-heating)
- -55 ~ +125 °C
- Storage temperature
- -55 ~ +125 °C
- Packaging
- 500 pieces per reel; tape pocket 13.4±0.10 × 14.1±0.10 × 6.9±0.15 mm
Datasheet VCMA-1365-XXX-M-1A, revision A3, 2025-11-26, page 4
Characteristic curves
Typical curves from the MAZO datasheet, for reference only.
Soldering and packaging
Alternative to these parts
VCMA-1365-5R6-M-1A matches the parts below in footprint class and nominal value. Check the pads and test samples before switching.
| Brand | Part number | L | Isat | Irms | DCR max | Size | Footprint | Recommended pads | VCMA-1365-5R6-M-1A vs. this part |
|---|---|---|---|---|---|---|---|---|---|
| Bourns | SRP1265A-5R6MSRP1265A | 5.6 µH | 23 A · 20% | 12.5 A · 40 °C | 10 mΩ | 13.5 × 12.5 × 6.2 mm | Pad-compatible | 5 × 3.1 mm, gap 8 mmClose to MAZO (0.5 mm off) | Drop-in candidate |
| Cyntec | VCMT136E-5R6MN54MVCMT136E MN54M | 5.6 µH | 12 A · 20% | 14 A · 40 °C | 10 mΩ | 13.45 × 12.6 × 6.3 mm | Pad-compatible | 4.953 × 3.226 mm, gap 8.28 mmClose to MAZO (0.547 mm off) | Drop-in candidate |
| Würth Elektronik | 744373965056WE-LHMI 1365 | 5.6 µH | 33 A · 30% | 13.3 A · 40 °C | 10 mΩ | 13.5 × 12.5 × 6.2 mm | Pad-compatible | 5 × 3.1 mm, gap 8 mmClose to MAZO (0.5 mm off) | Weaker figures |
| Würth Elektronik | 7443551600WE-HCI 1365 | 6 µH | 14 A · 30% | 12 A · 50 °C | 8.4 mΩ | 13 × 12.8 × 6.2 mm | Same footprint class | 5 × 4.5 mm, gap 6 mmDiffers from MAZO (2 mm off) | Figures qualify; check the pads |
| Vishay | IHLP5050FDER5R6MA1IHLP-5050FD-A1 | 5.6 µH | 26.5 A · 20% | 13.5 A · 40 °C | 10 mΩ | 13.2 × 12.9 × 6.4 mm | Same footprint class | 4.953 × 3.226 mm, gap 8.28 mmClose to MAZO (0.547 mm off) | With margin; check the pads |
| Vishay | IHLP5050FDEK5R6M01IHLP-5050FD-01 | 5.6 µH | 32 A · 20% | 13.5 A · 40 °C | 10 mΩ | 13.2 × 12.9 × 6.4 mm | Same footprint class | 4.95 × 2.945 mm, gap 7.87 mmDiffers from MAZO (0.74 mm off) | Weaker figures |
What each comparison means (6)
- Bourns SRP1265A-5R6M: Same inductance, 5.6 µH vs MAZO 5.6 µH. Saturation current 23 A (20% drop) vs MAZO 22 A typ. (30% drop), rated on different bases so not directly comparable; heating current 12.5 A (40 °C rise) vs MAZO 18 A typ. (40 °C rise). DCR 10 mΩ max vs MAZO 8.2 mΩ max. Body 13.5 × 12.5 × 6.2 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.3 mm taller. Land pattern close to MAZO's: two 5 × 3.1 mm pads 8 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.5 mm). Verdict: drop-in candidate (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Cyntec VCMT136E-5R6MN54M (VCMT136E MN54M): Same inductance, 5.6 µH vs MAZO 5.6 µH. Saturation current 12 A (20% drop) vs MAZO 22 A typ. (30% drop), rated on different bases so not directly comparable; heating current 14 A (40 °C rise) vs MAZO 18 A typ. (40 °C rise). DCR 10 mΩ max vs MAZO 8.2 mΩ max. Body 13.45 × 12.6 × 6.3 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.2 mm taller. Land pattern close to MAZO's: two 4.953 × 3.226 mm pads 8.28 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.547 mm). Verdict: drop-in candidate (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Würth Elektronik 744373965056 (WE-LHMI 1365): Same inductance, 5.6 µH vs MAZO 5.6 µH. Saturation current 33 A (30% drop) vs MAZO 22 A typ. (30% drop); heating current 13.3 A (40 °C rise) vs MAZO 18 A typ. (40 °C rise). DCR 10 mΩ max vs MAZO 8.2 mΩ max. Body 13.5 × 12.5 × 6.2 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.3 mm taller. Land pattern close to MAZO's: two 5 × 3.1 mm pads 8 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.5 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 33% lower, Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples.
- Würth Elektronik 7443551600 (WE-HCI 1365): Close inductance, 6 µH vs MAZO 5.6 µH. Saturation current 14 A (30% drop) vs MAZO 22 A typ. (30% drop); heating current 12 A (50 °C rise) vs MAZO 18 A typ. (40 °C rise), rated on different bases so not directly comparable. DCR 8.4 mΩ typ vs MAZO 7.1 mΩ typ. Body 13 × 12.8 × 6.2 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.3 mm taller. Land pattern differs from MAZO's: two 5 × 4.5 mm pads 6 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (gap differs by 2 mm). Verdict: the figures qualify, but the pads need checking (MAZO Isat not lower, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Vishay IHLP5050FDER5R6MA1 (IHLP-5050FD-A1): Same inductance, 5.6 µH vs MAZO 5.6 µH. Saturation current 26.5 A (20% drop) vs MAZO 22 A typ. (30% drop), rated on different bases so not directly comparable; heating current 13.5 A (40 °C rise) vs MAZO 18 A typ. (40 °C rise). DCR 10 mΩ max vs MAZO 8.2 mΩ max. Body 13.2 × 12.9 × 6.4 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.1 mm taller. Land pattern close to MAZO's: two 4.953 × 3.226 mm pads 8.28 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.547 mm). Verdict: replaceable with design margin, pads need checking (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Vishay IHLP5050FDEK5R6M01 (IHLP-5050FD-01): Same inductance, 5.6 µH vs MAZO 5.6 µH. Saturation current 32 A (20% drop) vs MAZO 22 A typ. (30% drop), rated on different bases so not directly comparable; heating current 13.5 A (40 °C rise) vs MAZO 18 A typ. (40 °C rise). DCR 10 mΩ max vs MAZO 8.2 mΩ max. Body 13.2 × 12.9 × 6.4 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.1 mm taller. Land pattern differs from MAZO's: two 4.95 × 2.945 mm pads 7.87 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (overall span differs by 0.74 mm). Verdict: MAZO figures are weaker, consider only with ample margin (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples.
How the figures are compared
Isat and Irms follow each datasheet's own definition, shown after the figure. MAZO figures are typical values from its spec table.
Recommended pads: pad width × pad length, then the gap between the two pads, from each datasheet, compared with MAZO's.
Same footprint, other values
Same 13.8 × 12.9 mm body, by inductance. Check the height before swapping.
| Part number | L | Isat | Idc | DCR max | Height | Unit price |
|---|---|---|---|---|---|---|
| VCMA-1350-1R5-M-1A | 1.5 µH | 39 A | 23 A | 3.1 mΩ | 5 mm | $0.75 |
| VCMA-1365-1R5-M-1A | 1.5 µH | 40 A | 35 A | 2.5 mΩ | 6.5 mm | $0.79 |
| VCMA-1350-2R2-M-1A | 2.2 µH | 28 A | 21 A | 4.6 mΩ | 5 mm | $0.72 |
| VCMA-1365-2R2-M-1A | 2.2 µH | 35 A | 30 A | 3.2 mΩ | 6.5 mm | $0.79 |
| VCMA-1350-3R3-M-1A | 3.3 µH | 24 A | 16 A | 6.9 mΩ | 5 mm | $0.75 |
| VCMA-1365-3R3-M-1A | 3.3 µH | 25 A | 22 A | 4.5 mΩ | 6.5 mm | $0.79 |
| VCMA-1350-4R7-M-1A | 4.7 µH | 20.5 A | 14 A | 9.2 mΩ | 5 mm | $0.75 |
| VCMA-1365-4R7-M-1A | 4.7 µH | 24 A | 20 A | 6.9 mΩ | 6.5 mm | $0.79 |
| VCMA-1350-5R6-M-1A | 5.6 µH | 20 A | 12 A | 12 mΩ | 5 mm | $0.75 |
| VCMA-1350-6R8-M-1A | 6.8 µH | 16.5 A | 11.5 A | 13.5 mΩ | 5 mm | $0.75 |
| VCMA-1365-6R8-M-1A | 6.8 µH | 20 A | 16 A | 11 mΩ | 6.5 mm | $0.93 |
| VCMA-1350-100-M-1A | 10 µH | 14 A | 8.5 A | 21.5 mΩ | 5 mm | $0.75 |
Same value, other sizes
Smallest first. A larger body usually carries more current; the pads differ.
| Part number | L | Isat | Idc | DCR max | Body | Unit price |
|---|---|---|---|---|---|---|
| VCMA-0630-5R6-M-1A | 5.6 µH | 6.5 A | 5.5 A | 42 mΩ | 7.3 × 6.8 × 3 mm | $0.33 |
Buy
Unit price · USD / piece$0.90For 5 pieces
Quantity pricingSelect a tier to set the quantity.
| Quantity | Unit price | Extended |
|---|---|---|
| 5–49 | $0.9 | $4.50 |
| 50–149 | $0.65 | $32.50 |
| 150–499 | $0.52 | $78.00 |
| 500–2999 | $0.398 | $199.00 |
Merchandise subtotal$4.50Item amount only; excludes packaging, handling, shipping, duties and tax. Packaging and handling charges are shown in the cart. Shipping, duties and tax are confirmed separately.
- Minimum order
- 5 pieces
- Order multiple
- 1 piece
- Availability
- Factory stock
- Dispatch preparation
- 2 days
Ships from ChinaShipping: DHL ExpressChoose a delivery country to see the transit estimate.
Dispatch preparation and shipping transit are separate. Arrival is estimated; the confirmed route and shipment tracking determine delivery.
PackagingFor the selected quantity
- Standard full-reel quantity
- 500 pieces
- Packed as
- Cut tape · 5 pieces
- Cut-tape fee
- None
- Online order limit
- 2999 pieces
Packaging and handling charges are shown in the cart. Shipping, duties and tax are confirmed separately.
Add this quantity to your cart to review order charges and the available payment steps. Sign in if prompted.
Selection and use
How to select
Choosing inductance
L ≈ (Vin − Vout) × Vout ÷ (Vin × fsw × ΔI), with ΔI at 20–40% of the output current. The series covers 1.0–33 µH in one body, so changing the value needs no new layout.
Saturation current Isat
the current at which inductance falls about 30%; keep the peak current below it.
Heating current Idc
the current that raises the part about 40 °C above a 25 °C ambient; ambient plus rise stays within 125 °C.
DC resistance
sets the conduction loss. Typical 1.65–39 mΩ across the series; use the maximum for loss budgets.
Rated voltage
75 V maximum; check it against the input voltage.
Height
Max 6.5 mm. Height-limited: VCMA-1350 (5.0 mm) on the same land pattern.
Industry and product applications
VCMA-1365-5R6-M-1A is a VCMA-1365 series part for evaluation in automotive electronics.
Manufacturer-listed series applications
Automotive applications.
MAZO datasheet: VCMA-1365-XXX-M-1A, revision A3, 2025-11-26 — applications on page 1
Circuit applications to evaluate
These are series applications and engineering evaluation examples. Select VCMA-1365-5R6-M-1A against the required inductance, peak and RMS current, switching frequency, temperature rise and PCB footprint. Inclusion here does not establish suitability for a particular design or qualification of the finished product.