VCMA-1365-4R7-M-1A
MAZO 4.7 µH shielded power inductor, Idc 20 A typ.
- Inductance
- 4.7 µH
- Isat
- 24 A
- Idc
- 20 A
- DCR max
- 6.9 mΩ
- Brand
- MAZO
- Series
- VCMA-1365
- Size
- 13.8 × 12.9 × 6.5 mm
- Category
- MAZO power inductors
- Related applications
- Automotive / OBC
- Features
- AEC-Q200RoHSHalogen free
- Stock
- Factory stock
Manufacturer series image
Specifications
Inductance L04.7 µH ±20% (1 MHz, 1.0 V)
DCR typ.6 mΩ
DCR max.6.9 mΩ
Heating current Idc typ.20 A
Heating current Idc max.19 A
Saturation current Isat typ.24 A
Saturation current Isat max.22 A
Rated voltage max.75 V
Package13.8 × 12.9 × 6.5 mm max
Operating temperature-55 °C to +125 °C (ambient plus self-temperature rise)
QualificationAEC-Q200 qualified; RoHS compliant; halogen free
BrandMAZO / Mazotech
ApplicationsAutomotive applications
Datasheet facts
- Recommended land pattern
- Two 5.5 × 3.25 mm pads, 8 mm apart, 14.5 mm overall
- Inductance test condition
- 1 MHz, 1.0 V, 25 °C
- Current definitions
- Isat: inductance drops about 30%; Idc: temperature rise about 40 °C
- Soldering
- Reflow per J-STD-020
- Operating temperature (ambient + self-heating)
- -55 ~ +125 °C
- Storage temperature
- -55 ~ +125 °C
- Packaging
- 500 pieces per reel; tape pocket 13.4±0.10 × 14.1±0.10 × 6.9±0.15 mm
Datasheet VCMA-1365-XXX-M-1A, revision A3, 2025-11-26, page 4
Characteristic curves
Typical curves from the MAZO datasheet, for reference only.
Soldering and packaging
Alternative to these parts
VCMA-1365-4R7-M-1A matches the parts below in footprint class and nominal value. Check the pads and test samples before switching.
| Brand | Part number | L | Isat | Irms | DCR max | Size | Footprint | Recommended pads | VCMA-1365-4R7-M-1A vs. this part |
|---|---|---|---|---|---|---|---|---|---|
| Cyntec | VCMI136E-4R7MN54MVCMI136E MN54M | 4.7 µH | 21.3 A · 20% | 17.1 A · 40 °C | 6.9 mΩ | 13.45 × 12.6 × 6.3 mm | Pad-compatible | 4.953 × 3.226 mm, gap 8.28 mmClose to MAZO (0.547 mm off) | Drop-in candidate |
| Cyntec | VCMT136E-4R7MN54MVCMT136E MN54M | 4.7 µH | 13.5 A · 20% | 15 A · 40 °C | 8.7 mΩ | 13.45 × 12.6 × 6.3 mm | Pad-compatible | 4.953 × 3.226 mm, gap 8.28 mmClose to MAZO (0.547 mm off) | Drop-in candidate |
| Bourns | SRP1265A-4R7MSRP1265A | 4.7 µH | 28 A · 20% | 13.5 A · 40 °C | 8.4 mΩ | 13.5 × 12.5 × 6.2 mm | Pad-compatible | 5 × 3.1 mm, gap 8 mmClose to MAZO (0.5 mm off) | With design margin |
| Bourns | SRP1265CC-4R7MSRP1265CC | 4.7 µH | 31 A · 30% | 20 A · 40 °C | 9.5 mΩ | 13.5 × 12.5 × 6.2 mm | Pad-compatible | 5 × 3.1 mm, gap 8 mmClose to MAZO (0.5 mm off) | With design margin |
| Cyntec | CMLS136E-4R7MSCMLS136E | 4.7 µH | 30 A · 30% | 16 A · 40 °C | 8.5 mΩ | 13.45 × 12.6 × 6.3 mm | Pad-compatible | 5 × 3.3 mm, gap 8 mmClose to MAZO (0.5 mm off) | With design margin |
| Würth Elektronik | 744373965047WE-LHMI 1365 | 4.7 µH | 35.8 A · 30% | 15.1 A · 40 °C | 8.4 mΩ | 13.5 × 12.5 × 6.2 mm | Pad-compatible | 5 × 3.1 mm, gap 8 mmClose to MAZO (0.5 mm off) | Weaker figures |
| Würth Elektronik | 7443551470WE-HCI 1365 | 4.7 µH | 15 A · 30% | 13 A · 50 °C | 7 mΩ | 13 × 12.8 × 6.2 mm | Same footprint class | 5 × 4.5 mm, gap 6 mmDiffers from MAZO (2 mm off) | Figures qualify; check the pads |
| Cyntec | VCMV136E-4R7MN24MVCMV136E MN24M | 4.7 µH | 27.3 A · 20% | 14.8 A · 40 °C | 9.6 mΩ | 13.45 × 12.6 × 6.3 mm | Same footprint class | 5.7 × 4.335 mm, gap 7.2 mmDiffers from MAZO (1.37 mm off) | With margin; check the pads |
| TDK | SPM12565VC-4R7M-DSPM12565VC-D | 4.7 µH | 30.6 A · 30% | 14.6 A · 40 °C | 7.94 mΩ | 13 × 12.5 × 6.5 mm | Same footprint class | 5 × 3.25 mm, gap 8.2 mmClose to MAZO (0.5 mm off) | With margin; check the pads |
| TDK | SPM12565VT-4R7M-DSPM12565VT-D | 4.7 µH | 30.1 A · 30% | 14 A · 40 °C | 7.81 mΩ | 13 × 12.5 × 6.5 mm | Same footprint class | 5 × 3.25 mm, gap 8.2 mmClose to MAZO (0.5 mm off) | With margin; check the pads |
| Vishay | IHLP5050FDEK4R7M01IHLP-5050FD-01 | 4.7 µH | 32 A · 20% | 13.5 A · 40 °C | 8.7 mΩ | 13.2 × 12.9 × 6.4 mm | Same footprint class | 4.95 × 2.945 mm, gap 7.87 mmDiffers from MAZO (0.74 mm off) | With margin; check the pads |
| Vishay | IHLP5050FDER4R7MA1IHLP-5050FD-A1 | 4.7 µH | 30 A · 20% | 13.5 A · 40 °C | 11.2 mΩ | 13.2 × 12.9 × 6.4 mm | Same footprint class | 4.953 × 3.226 mm, gap 8.28 mmClose to MAZO (0.547 mm off) | With margin; check the pads |
What each comparison means (12)
- Cyntec VCMI136E-4R7MN54M (VCMI136E MN54M): Same inductance, 4.7 µH vs MAZO 4.7 µH. Saturation current 21.3 A (20% drop) vs MAZO 24 A typ. (30% drop), rated on different bases so not directly comparable; heating current 17.1 A (40 °C rise) vs MAZO 20 A typ. (40 °C rise). DCR 6.9 mΩ max vs MAZO 6.9 mΩ max. Body 13.45 × 12.6 × 6.3 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.2 mm taller. Land pattern close to MAZO's: two 4.953 × 3.226 mm pads 8.28 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.547 mm). Verdict: drop-in candidate (Idc not lower at 40 °C rise, DCR equal). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Cyntec VCMT136E-4R7MN54M (VCMT136E MN54M): Same inductance, 4.7 µH vs MAZO 4.7 µH. Saturation current 13.5 A (20% drop) vs MAZO 24 A typ. (30% drop), rated on different bases so not directly comparable; heating current 15 A (40 °C rise) vs MAZO 20 A typ. (40 °C rise). DCR 8.7 mΩ max vs MAZO 6.9 mΩ max. Body 13.45 × 12.6 × 6.3 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.2 mm taller. Land pattern close to MAZO's: two 4.953 × 3.226 mm pads 8.28 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.547 mm). Verdict: drop-in candidate (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Bourns SRP1265A-4R7M: Same inductance, 4.7 µH vs MAZO 4.7 µH. Saturation current 28 A (20% drop) vs MAZO 24 A typ. (30% drop), rated on different bases so not directly comparable; heating current 13.5 A (40 °C rise) vs MAZO 20 A typ. (40 °C rise). DCR 8.4 mΩ max vs MAZO 6.9 mΩ max. Body 13.5 × 12.5 × 6.2 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.3 mm taller. Land pattern close to MAZO's: two 5 × 3.1 mm pads 8 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.5 mm). Verdict: replaceable with design margin (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Bourns SRP1265CC-4R7M: Same inductance, 4.7 µH vs MAZO 4.7 µH. Saturation current 31 A (30% drop) vs MAZO 24 A typ. (30% drop); heating current 20 A (40 °C rise) vs MAZO 20 A typ. (40 °C rise). DCR 9.5 mΩ max vs MAZO 6.9 mΩ max. Body 13.5 × 12.5 × 6.2 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.3 mm taller. Land pattern close to MAZO's: two 5 × 3.1 mm pads 8 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.5 mm). Verdict: replaceable with design margin (MAZO Isat about 23% lower, Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples.
- Cyntec CMLS136E-4R7MS: Same inductance, 4.7 µH vs MAZO 4.7 µH. Saturation current 30 A (30% drop) vs MAZO 24 A typ. (30% drop); heating current 16 A (40 °C rise) vs MAZO 20 A typ. (40 °C rise). DCR 8.5 mΩ max vs MAZO 6.9 mΩ max. Body 13.45 × 12.6 × 6.3 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.2 mm taller. Land pattern close to MAZO's: two 5 × 3.3 mm pads 8 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.5 mm). Verdict: replaceable with design margin (MAZO Isat about 20% lower, Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples.
- Würth Elektronik 744373965047 (WE-LHMI 1365): Same inductance, 4.7 µH vs MAZO 4.7 µH. Saturation current 35.8 A (30% drop) vs MAZO 24 A typ. (30% drop); heating current 15.1 A (40 °C rise) vs MAZO 20 A typ. (40 °C rise). DCR 8.4 mΩ max vs MAZO 6.9 mΩ max. Body 13.5 × 12.5 × 6.2 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.3 mm taller. Land pattern close to MAZO's: two 5 × 3.1 mm pads 8 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.5 mm). Verdict: MAZO figures are weaker, consider only with ample margin (MAZO Isat about 33% lower, Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples.
- Würth Elektronik 7443551470 (WE-HCI 1365): Same inductance, 4.7 µH vs MAZO 4.7 µH. Saturation current 15 A (30% drop) vs MAZO 24 A typ. (30% drop); heating current 13 A (50 °C rise) vs MAZO 20 A typ. (40 °C rise), rated on different bases so not directly comparable. DCR 7 mΩ typ vs MAZO 6 mΩ typ. Body 13 × 12.8 × 6.2 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.3 mm taller. Land pattern differs from MAZO's: two 5 × 4.5 mm pads 6 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (gap differs by 2 mm). Verdict: the figures qualify, but the pads need checking (MAZO Isat not lower, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Cyntec VCMV136E-4R7MN24M (VCMV136E MN24M): Same inductance, 4.7 µH vs MAZO 4.7 µH. Saturation current 27.3 A (20% drop) vs MAZO 24 A typ. (30% drop), rated on different bases so not directly comparable; heating current 14.8 A (40 °C rise) vs MAZO 20 A typ. (40 °C rise). DCR 9.6 mΩ max vs MAZO 6.9 mΩ max. Body 13.45 × 12.6 × 6.3 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.2 mm taller. Land pattern differs from MAZO's: two 5.7 × 4.335 mm pads 7.2 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (overall span differs by 1.37 mm). Verdict: replaceable with design margin, pads need checking (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- TDK SPM12565VC-4R7M-D (SPM12565VC-D): Same inductance, 4.7 µH vs MAZO 4.7 µH. Saturation current 30.6 A (30% drop) vs MAZO 24 A typ. (30% drop); heating current 14.6 A (40 °C rise) vs MAZO 20 A typ. (40 °C rise). DCR 7.94 mΩ max vs MAZO 6.9 mΩ max. Body 13 × 12.5 × 6.5 mm vs MAZO 13.8 × 12.9 × 6.5 mm. Land pattern close to MAZO's: two 5 × 3.25 mm pads 8.2 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.5 mm). Verdict: replaceable with design margin, pads need checking (MAZO Isat about 22% lower, Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- TDK SPM12565VT-4R7M-D (SPM12565VT-D): Same inductance, 4.7 µH vs MAZO 4.7 µH. Saturation current 30.1 A (30% drop) vs MAZO 24 A typ. (30% drop); heating current 14 A (40 °C rise) vs MAZO 20 A typ. (40 °C rise). DCR 7.81 mΩ max vs MAZO 6.9 mΩ max. Body 13 × 12.5 × 6.5 mm vs MAZO 13.8 × 12.9 × 6.5 mm. Land pattern close to MAZO's: two 5 × 3.25 mm pads 8.2 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.5 mm). Verdict: replaceable with design margin, pads need checking (MAZO Isat about 20% lower, Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Vishay IHLP5050FDEK4R7M01 (IHLP-5050FD-01): Same inductance, 4.7 µH vs MAZO 4.7 µH. Saturation current 32 A (20% drop) vs MAZO 24 A typ. (30% drop), rated on different bases so not directly comparable; heating current 13.5 A (40 °C rise) vs MAZO 20 A typ. (40 °C rise). DCR 8.7 mΩ max vs MAZO 6.9 mΩ max. Body 13.2 × 12.9 × 6.4 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.1 mm taller. Land pattern differs from MAZO's: two 4.95 × 2.945 mm pads 7.87 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (overall span differs by 0.74 mm). Verdict: replaceable with design margin, pads need checking (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples.
- Vishay IHLP5050FDER4R7MA1 (IHLP-5050FD-A1): Same inductance, 4.7 µH vs MAZO 4.7 µH. Saturation current 30 A (20% drop) vs MAZO 24 A typ. (30% drop), rated on different bases so not directly comparable; heating current 13.5 A (40 °C rise) vs MAZO 20 A typ. (40 °C rise). DCR 11.2 mΩ max vs MAZO 6.9 mΩ max. Body 13.2 × 12.9 × 6.4 mm vs MAZO 13.8 × 12.9 × 6.5 mm, MAZO 0.1 mm taller. Land pattern close to MAZO's: two 4.953 × 3.226 mm pads 8.28 mm apart vs MAZO two 5.5 × 3.25 mm pads 8 mm apart (pad width differs by 0.547 mm). Verdict: replaceable with design margin, pads need checking (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
How the figures are compared
Isat and Irms follow each datasheet's own definition, shown after the figure. MAZO figures are typical values from its spec table.
Recommended pads: pad width × pad length, then the gap between the two pads, from each datasheet, compared with MAZO's.
Same footprint, other values
Same 13.8 × 12.9 mm body, by inductance. Check the height before swapping.
| Part number | L | Isat | Idc | DCR max | Height | Unit price |
|---|---|---|---|---|---|---|
| VCMA-1350-1R0-M-1A | 1 µH | 39.5 A | 26 A | 2 mΩ | 5 mm | $0.75 |
| VCMA-1350-1R5-M-1A | 1.5 µH | 39 A | 23 A | 3.1 mΩ | 5 mm | $0.75 |
| VCMA-1365-1R5-M-1A | 1.5 µH | 40 A | 35 A | 2.5 mΩ | 6.5 mm | $0.79 |
| VCMA-1350-2R2-M-1A | 2.2 µH | 28 A | 21 A | 4.6 mΩ | 5 mm | $0.72 |
| VCMA-1365-2R2-M-1A | 2.2 µH | 35 A | 30 A | 3.2 mΩ | 6.5 mm | $0.79 |
| VCMA-1350-3R3-M-1A | 3.3 µH | 24 A | 16 A | 6.9 mΩ | 5 mm | $0.75 |
| VCMA-1365-3R3-M-1A | 3.3 µH | 25 A | 22 A | 4.5 mΩ | 6.5 mm | $0.79 |
| VCMA-1350-4R7-M-1A | 4.7 µH | 20.5 A | 14 A | 9.2 mΩ | 5 mm | $0.75 |
| VCMA-1350-5R6-M-1A | 5.6 µH | 20 A | 12 A | 12 mΩ | 5 mm | $0.75 |
| VCMA-1365-5R6-M-1A | 5.6 µH | 22 A | 18 A | 8.2 mΩ | 6.5 mm | $0.90 |
| VCMA-1350-6R8-M-1A | 6.8 µH | 16.5 A | 11.5 A | 13.5 mΩ | 5 mm | $0.75 |
| VCMA-1365-6R8-M-1A | 6.8 µH | 20 A | 16 A | 11 mΩ | 6.5 mm | $0.93 |
Same value, other sizes
Smallest first. A larger body usually carries more current; the pads differ.
| Part number | L | Isat | Idc | DCR max | Body | Unit price |
|---|---|---|---|---|---|---|
| VCMA-0420-4R7-M-1A | 4.7 µH | 3.3 A | 2.5 A | 105 mΩ | 4.75 × 4.45 × 2 mm | $0.33 |
| VCMA-0530-4R7-M-1A | 4.7 µH | 5.5 A | 3.5 A | 58 mΩ | 5.7 × 5.4 × 3 mm | $0.30 |
| VCMA-1040-4R7-M-1A | 4.7 µH | 15 A | 10.5 A | 16 mΩ | 11.5 × 10.3 × 4 mm | $0.55 |
Buy
Unit price · USD / piece$0.79For 5 pieces
Quantity pricingSelect a tier to set the quantity.
| Quantity | Unit price | Extended |
|---|---|---|
| 5–49 | $0.79 | $3.95 |
| 50–149 | $0.57 | $28.50 |
| 150–499 | $0.461 | $69.15 |
| 500–2999 | $0.356 | $178.00 |
Merchandise subtotal$3.95Item amount only; excludes packaging, handling, shipping, duties and tax. Packaging and handling charges are shown in the cart. Shipping, duties and tax are confirmed separately.
- Minimum order
- 5 pieces
- Order multiple
- 1 piece
- Availability
- Factory stock
- Dispatch preparation
- 2 days
Ships from ChinaShipping: DHL ExpressChoose a delivery country to see the transit estimate.
Dispatch preparation and shipping transit are separate. Arrival is estimated; the confirmed route and shipment tracking determine delivery.
PackagingFor the selected quantity
- Standard full-reel quantity
- 500 pieces
- Packed as
- Cut tape · 5 pieces
- Cut-tape fee
- None
- Online order limit
- 2999 pieces
Packaging and handling charges are shown in the cart. Shipping, duties and tax are confirmed separately.
Add this quantity to your cart to review order charges and the available payment steps. Sign in if prompted.
Selection and use
How to select
Choosing inductance
L ≈ (Vin − Vout) × Vout ÷ (Vin × fsw × ΔI), with ΔI at 20–40% of the output current. The series covers 1.0–33 µH in one body, so changing the value needs no new layout.
Saturation current Isat
the current at which inductance falls about 30%; keep the peak current below it.
Heating current Idc
the current that raises the part about 40 °C above a 25 °C ambient; ambient plus rise stays within 125 °C.
DC resistance
sets the conduction loss. Typical 1.65–39 mΩ across the series; use the maximum for loss budgets.
Rated voltage
75 V maximum; check it against the input voltage.
Height
Max 6.5 mm. Height-limited: VCMA-1350 (5.0 mm) on the same land pattern.
Industry and product applications
VCMA-1365-4R7-M-1A is a VCMA-1365 series part for evaluation in automotive electronics.
Manufacturer-listed series applications
Automotive applications.
MAZO datasheet: VCMA-1365-XXX-M-1A, revision A3, 2025-11-26 — applications on page 1
Circuit applications to evaluate
These are series applications and engineering evaluation examples. Select VCMA-1365-4R7-M-1A against the required inductance, peak and RMS current, switching frequency, temperature rise and PCB footprint. Inclusion here does not establish suitability for a particular design or qualification of the finished product.