MAZO 5.6 µH shielded power inductor, Idc 12 A typ.
- Inductance
- 5.6 µH
- Isat
- 20 A
- Idc
- 12 A
- DCR max
- 12 mΩ
- Brand
- MAZO
- Series
- VCMA-1350
- Size
- 13.8 × 12.9 × 5 mm
- Category
- MAZO power inductors
- Related applications
- Automotive / OBC
- Features
- AEC-Q200Magnetic shieldRoHSHalogen free
- Stock
- Factory stock
Specifications
Datasheet facts
- Recommended land pattern
- Two 5 × 3.25 mm pads, 8 mm apart, 14.5 mm overall
- Inductance test condition
- 1 MHz, 1.0 V, 25 °C
- Current definitions
- Isat: inductance drops about 30%; Idc: temperature rise about 40 °C
- Soldering
- Reflow per J-STD-020
- Operating temperature (ambient + self-heating)
- -55 ~ +125 °C
- Storage temperature
- -55 ~ +125 °C
- Packaging
- 500 pieces per reel; tape pocket 13.4±0.10 × 14.4±0.10 × 5.4±0.15 mm
Datasheet VCMA-1350-XXX-M-1A, revision A4, 2025-11-26, page 4
Characteristic curves
Typical curves from the MAZO datasheet, for reference only.
Soldering and packaging
Alternative to these parts
VCMA-1350-5R6-M-1A matches the parts below in footprint class and nominal value. Check the pads and test samples before switching.
| Brand | Part number | L | Isat | Irms | DCR max | Size | Footprint | Recommended pads | VCMA-1350-5R6-M-1A vs. this part |
|---|---|---|---|---|---|---|---|---|---|
| Bourns | SRP1245A-5R6MSRP1245A | 5.6 µH | 22 A · 20% | 11.5 A · 40 °C | 16.5 mΩ | 13.5 × 12.5 × 4.8 mm | Pad-compatible | 5 × 3.1 mm, gap 8 mmClose to MAZO (0.3 mm off) | Drop-in candidate |
| Vishay | IHLP5050EZEK5R6M01IHLP-5050EZ-01 | 5.6 µH | 22 A · 20% | 11.5 A · 40 °C | 16.5 mΩ | 13.2 × 12.9 × 5 mm | Same footprint class | 4.953 × 3.226 mm, gap 8.28 mmClose to MAZO (0.28 mm off) | Figures qualify; check the pads |
| Vishay | IHLP5050EZEK5R6MA1IHLP-5050EZ-A1 | 5.6 µH | 22 A · 20% | 11.5 A · 40 °C | 16.5 mΩ | 13.2 × 12.9 × 5 mm | Same footprint class | 4.953 × 3.226 mm, gap 8.28 mmClose to MAZO (0.28 mm off) | Figures qualify; check the pads |
| Würth Elektronik | 7443550600WE-HCI 1350 | 6 µH | 11.5 A · 30% | 9.5 A · 50 °C | 13.5 mΩ | 13 × 12.8 × 4.7 mm | Same footprint class | 5 × 4.5 mm, gap 6 mmDiffers from MAZO (2 mm off) | Figures qualify; check the pads |
What each comparison means (4)
- Bourns SRP1245A-5R6M: Same inductance, 5.6 µH vs MAZO 5.6 µH. Saturation current 22 A (20% drop) vs MAZO 20 A typ. (30% drop), rated on different bases so not directly comparable; heating current 11.5 A (40 °C rise) vs MAZO 12 A typ. (40 °C rise). DCR 16.5 mΩ max vs MAZO 12 mΩ max. Body 13.5 × 12.5 × 4.8 mm vs MAZO 13.8 × 12.9 × 5 mm, MAZO 0.2 mm taller. Land pattern close to MAZO's: two 5 × 3.1 mm pads 8 mm apart vs MAZO two 5 × 3.25 mm pads 8 mm apart (overall span differs by 0.3 mm). Verdict: drop-in candidate (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Vishay IHLP5050EZEK5R6M01 (IHLP-5050EZ-01): Same inductance, 5.6 µH vs MAZO 5.6 µH. Saturation current 22 A (20% drop) vs MAZO 20 A typ. (30% drop), rated on different bases so not directly comparable; heating current 11.5 A (40 °C rise) vs MAZO 12 A typ. (40 °C rise). DCR 16.5 mΩ max vs MAZO 12 mΩ max. Body 13.2 × 12.9 × 5 mm vs MAZO 13.8 × 12.9 × 5 mm. Land pattern close to MAZO's: two 4.953 × 3.226 mm pads 8.28 mm apart vs MAZO two 5 × 3.25 mm pads 8 mm apart (gap differs by 0.28 mm). Verdict: the figures qualify, but the pads need checking (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples.
- Vishay IHLP5050EZEK5R6MA1 (IHLP-5050EZ-A1): Same inductance, 5.6 µH vs MAZO 5.6 µH. Saturation current 22 A (20% drop) vs MAZO 20 A typ. (30% drop), rated on different bases so not directly comparable; heating current 11.5 A (40 °C rise) vs MAZO 12 A typ. (40 °C rise). DCR 16.5 mΩ max vs MAZO 12 mΩ max. Body 13.2 × 12.9 × 5 mm vs MAZO 13.8 × 12.9 × 5 mm. Land pattern close to MAZO's: two 4.953 × 3.226 mm pads 8.28 mm apart vs MAZO two 5 × 3.25 mm pads 8 mm apart (gap differs by 0.28 mm). Verdict: the figures qualify, but the pads need checking (Idc not lower at 40 °C rise, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
- Würth Elektronik 7443550600 (WE-HCI 1350): Close inductance, 6 µH vs MAZO 5.6 µH. Saturation current 11.5 A (30% drop) vs MAZO 20 A typ. (30% drop); heating current 9.5 A (50 °C rise) vs MAZO 12 A typ. (40 °C rise), rated on different bases so not directly comparable. DCR 13.5 mΩ typ vs MAZO 10.5 mΩ typ. Body 13 × 12.8 × 4.7 mm vs MAZO 13.8 × 12.9 × 5 mm, MAZO 0.3 mm taller. Land pattern differs from MAZO's: two 5 × 4.5 mm pads 6 mm apart vs MAZO two 5 × 3.25 mm pads 8 mm apart (gap differs by 2 mm). Verdict: the figures qualify, but the pads need checking (MAZO Isat not lower, DCR lower, less conduction loss). Before switching, verify brands define Isat/Irms differently: check the real peak current and allowed temperature rise, height clearance, the land pattern against both drawings and test samples. Both parts are AEC-Q200.
How the figures are compared
Isat and Irms follow each datasheet's own definition, shown after the figure. MAZO figures are typical values from its spec table.
Recommended pads: pad width × pad length, then the gap between the two pads, from each datasheet, compared with MAZO's.
Same footprint, other values
Same 13.8 × 12.9 mm body, by inductance. Check the height before swapping.
| Part number | L | Isat | Idc | DCR max | Height | Unit price |
|---|---|---|---|---|---|---|
| VCMA-1350-1R5-M-1A | 1.5 µH | 39 A | 23 A | 3.1 mΩ | 5 mm | $0.75 |
| VCMA-1365-1R5-M-1A | 1.5 µH | 40 A | 35 A | 2.5 mΩ | 6.5 mm | $0.79 |
| VCMA-1350-2R2-M-1A | 2.2 µH | 28 A | 21 A | 4.6 mΩ | 5 mm | $0.72 |
| VCMA-1365-2R2-M-1A | 2.2 µH | 35 A | 30 A | 3.2 mΩ | 6.5 mm | $0.79 |
| VCMA-1350-3R3-M-1A | 3.3 µH | 24 A | 16 A | 6.9 mΩ | 5 mm | $0.75 |
| VCMA-1365-3R3-M-1A | 3.3 µH | 25 A | 22 A | 4.5 mΩ | 6.5 mm | $0.79 |
| VCMA-1350-4R7-M-1A | 4.7 µH | 20.5 A | 14 A | 9.2 mΩ | 5 mm | $0.75 |
| VCMA-1365-4R7-M-1A | 4.7 µH | 24 A | 20 A | 6.9 mΩ | 6.5 mm | $0.79 |
| VCMA-1365-5R6-M-1A | 5.6 µH | 22 A | 18 A | 8.2 mΩ | 6.5 mm | $0.90 |
| VCMA-1350-6R8-M-1A | 6.8 µH | 16.5 A | 11.5 A | 13.5 mΩ | 5 mm | $0.75 |
| VCMA-1365-6R8-M-1A | 6.8 µH | 20 A | 16 A | 11 mΩ | 6.5 mm | $0.93 |
| VCMA-1350-100-M-1A | 10 µH | 14 A | 8.5 A | 21.5 mΩ | 5 mm | $0.75 |
Same value, other sizes
Smallest first. A larger body usually carries more current; the pads differ.
| Part number | L | Isat | Idc | DCR max | Body | Unit price |
|---|---|---|---|---|---|---|
| VCMA-0630-5R6-M-1A | 5.6 µH | 6.5 A | 5.5 A | 42 mΩ | 7.3 × 6.8 × 3 mm | $0.33 |
Buy
| Quantity | Unit price | Extended |
|---|---|---|
| 5–49 | $0.75 | $3.75 |
| 50–149 | $0.54 | $27.00 |
| 150–499 | $0.436 | $65.40 |
| 500–2999 | $0.338 | $169.00 |
- Minimum order
- 5 pieces
- Order multiple
- 1 piece
- Availability
- Factory stock
- Dispatch preparation
- 2 days
Dispatch preparation and shipping transit are separate. Arrival is estimated; the confirmed route and shipment tracking determine delivery.
- Standard full-reel quantity
- 500 pieces
- Packed as
- Cut tape · 5 pieces
- Cut-tape fee
- None
- Online order limit
- 2999 pieces
Packaging and handling charges are shown in the cart. Shipping, duties and tax are confirmed separately.
Add this quantity to your cart to review order charges and the available payment steps. Sign in if prompted.
Selection and use
How to select
Choosing inductance
L ≈ (Vin − Vout) × Vout ÷ (Vin × fsw × ΔI), with ΔI at 20–40% of the output current. The series covers 0.22–33 µH in one body, so changing the value needs no new layout.
Saturation current Isat
the current at which inductance falls about 30%; keep the peak current below it.
Heating current Idc
the current that raises the part about 40 °C above a 25 °C ambient; ambient plus rise stays within 125 °C.
DC resistance
sets the conduction loss. Typical 0.54–50 mΩ across the series; use the maximum for loss budgets.
Rated voltage
75 V maximum; check it against the input voltage.
Height
Max 5.0 mm. VCMA-1365 shares the land pattern at 6.5 mm with more inductance; smaller: VCMA-1040.
Industry and product applications
VCMA-1350-5R6-M-1A is a VCMA-1350 series part for evaluation in automotive electronics.
Manufacturer-listed series applications
Automotive applications.
MAZO datasheet: VCMA-1350-XXX-M-1A, revision A4, 2025-11-26 — applications on page 1
Circuit applications to evaluate
These are series applications and engineering evaluation examples. Select VCMA-1350-5R6-M-1A against the required inductance, peak and RMS current, switching frequency, temperature rise and PCB footprint. Inclusion here does not establish suitability for a particular design or qualification of the finished product.