| SI-BOAT-RFQSilicon boat / tower | Monocrystalline silicon boat / tower for a diffusion furnace. Made to print or to sample.Selection and part-number notes- Send a drawing or a sample, the tool model, the OEM part number, dimensions and quantity. No catalog dimensions are published; they are confirmed from your drawing or sample.
- Compare wafer diameter, usable slot count, slot pitch and wafer-contact geometry on the approved drawing. A matching wafer diameter alone does not establish fit.
- Confirm the loading/base interface and overall envelope. When using a worn sample, agree how original geometry and damaged features will be distinguished before manufacture.
- The catalogue states monocrystalline silicon but no part-specific purity, resistivity or operating limits. Supply your required values and supporting-document requirements for confirmation.
- State quantity, destination and requested arrival date. Price, configuration and dispatch are confirmed by quotation; freight and customs scope must be agreed separately.
| - Material
- Silicon (monocrystalline)
- Process / tool type
- DIFF furnace
- Supply
- Made to print or to sample; price and configuration confirmed by quotation
- Manufacturer
- Jishengwei (Ningbo); MST is their agent
| View product and request a quote |
|---|
| SI-INJECTOR-RFQSilicon injector | Monocrystalline silicon injector for a diffusion furnace. Made to print or to sample.Selection and part-number notes- Send a drawing or a sample, the tool model, the OEM part number, dimensions and quantity. No catalog dimensions are published; they are confirmed from your drawing or sample.
- Identify the diffusion-tool model and injector position. Provide overall geometry, inlet connection and the required outlet/hole layout from the approved drawing.
- State the required material, surface and cleanliness criteria. A photograph can identify the family but cannot define internal passages or installation fit.
- The catalogue states monocrystalline silicon but no part-specific purity, resistivity or operating limits. Supply your required values and supporting-document requirements for confirmation.
- State quantity, destination and requested arrival date. Price, configuration and dispatch are confirmed by quotation; freight and customs scope must be agreed separately.
| - Material
- Silicon (monocrystalline)
- Process / tool type
- DIFF furnace
- Supply
- Made to print or to sample; price and configuration confirmed by quotation
- Manufacturer
- Jishengwei (Ningbo); MST is their agent
| View product and request a quote |
|---|
| SI-PEDESTAL-RFQSilicon pedestal / cap | Monocrystalline silicon pedestal / cap for a diffusion furnace. Made to print or to sample.Selection and part-number notes- Send a drawing or a sample, the tool model, the OEM part number, dimensions and quantity. No catalog dimensions are published; they are confirmed from your drawing or sample.
- Clarify whether the requested part is a pedestal, a cap or an assembly. Identify its position in the diffusion tool and the mating component.
- Compare support/contact surfaces, overall height, locating features and drawing tolerances. Similar overall dimensions do not establish an equivalent interface.
- The catalogue states monocrystalline silicon but no part-specific purity, resistivity or operating limits. Supply your required values and supporting-document requirements for confirmation.
- State quantity, destination and requested arrival date. Price, configuration and dispatch are confirmed by quotation; freight and customs scope must be agreed separately.
| - Material
- Silicon (monocrystalline)
- Process / tool type
- DIFF furnace
- Supply
- Made to print or to sample; price and configuration confirmed by quotation
- Manufacturer
- Jishengwei (Ningbo); MST is their agent
| View product and request a quote |
|---|
| SI-FIN-RFQSilicon fin | Monocrystalline silicon fin for a diffusion furnace. Made to print or to sample.Selection and part-number notes- Send a drawing or a sample, the tool model, the OEM part number, dimensions and quantity. No catalog dimensions are published; they are confirmed from your drawing or sample.
- Identify the fin location and function in the diffusion-tool assembly. Supply the approved profile, thickness, overall dimensions and any mounting details.
- Confirm whether the request is for an individual fin or a matched set and define the inspection criteria on the drawing.
- The catalogue states monocrystalline silicon but no part-specific purity, resistivity or operating limits. Supply your required values and supporting-document requirements for confirmation.
- State quantity, destination and requested arrival date. Price, configuration and dispatch are confirmed by quotation; freight and customs scope must be agreed separately.
| - Material
- Silicon (monocrystalline)
- Process / tool type
- DIFF furnace
- Supply
- Made to print or to sample; price and configuration confirmed by quotation
- Manufacturer
- Jishengwei (Ningbo); MST is their agent
| View product and request a quote |
|---|
| SI-FOCUS-RING-RFQSilicon focus ring | Monocrystalline silicon focus ring for a plasma etch chamber. Made to print or to sample.Selection and part-number notes- Send a drawing or a sample, the tool model, the OEM part number, dimensions and quantity. No catalog dimensions are published; they are confirmed from your drawing or sample.
- Compare the complete ring cross-section: inner/outer diameters, steps, thickness, mating faces and position relative to the wafer/support. Outside diameter alone is insufficient.
- Identify the exact chamber position and OEM drawing revision. Keep an etch focus ring separate from RTP guard-ring enquiries even when photos look similar.
- The catalogue states monocrystalline silicon but no part-specific purity, resistivity or operating limits. Supply your required values and supporting-document requirements for confirmation.
- State quantity, destination and requested arrival date. Price, configuration and dispatch are confirmed by quotation; freight and customs scope must be agreed separately.
| - Material
- Silicon (monocrystalline)
- Process / tool type
- ETCH (plasma etch chamber)
- Supply
- Made to print or to sample; price and configuration confirmed by quotation
- Manufacturer
- Jishengwei (Ningbo); MST is their agent
| View product and request a quote |
|---|
| SI-EDGE-RING-RFQSilicon edge ring / ground ring | Monocrystalline silicon edge ring / ground ring for a plasma etch chamber. Made to print or to sample.Selection and part-number notes- Send a drawing or a sample, the tool model, the OEM part number, dimensions and quantity. No catalog dimensions are published; they are confirmed from your drawing or sample.
- Identify the etch chamber, ring position and the equipment maker’s component name. Keep this edge / ground-ring enquiry separate from focus-ring and RTP-ring enquiries.
- Compare the complete cross-section, inner/outer diameters, steps, thickness and mating faces. Provide the applicable electrical/material requirements from the approved specification.
- The catalogue states monocrystalline silicon but no part-specific purity, resistivity or operating limits. Supply your required values and supporting-document requirements for confirmation.
- State quantity, destination and requested arrival date. Price, configuration and dispatch are confirmed by quotation; freight and customs scope must be agreed separately.
| - Material
- Silicon (monocrystalline)
- Process / tool type
- ETCH (plasma etch chamber)
- Supply
- Made to print or to sample; price and configuration confirmed by quotation
- Manufacturer
- Jishengwei (Ningbo); MST is their agent
| View product and request a quote |
|---|
| SI-UPPER-GROUND-RING-RFQSilicon upper ground ring | Monocrystalline silicon upper ground ring for a plasma etch chamber. Made to print or to sample.Selection and part-number notes- Send a drawing or a sample, the tool model, the OEM part number, dimensions and quantity. No catalog dimensions are published; they are confirmed from your drawing or sample.
- Confirm that the requested component is the upper ground ring and identify its chamber position, OEM reference and drawing revision.
- Compare its full cross-section, locating and contact faces, mounting details and specified electrical/material requirements. Do not substitute a lower or edge ring by name alone.
- The catalogue states monocrystalline silicon but no part-specific purity, resistivity or operating limits. Supply your required values and supporting-document requirements for confirmation.
- State quantity, destination and requested arrival date. Price, configuration and dispatch are confirmed by quotation; freight and customs scope must be agreed separately.
| - Material
- Silicon (monocrystalline)
- Process / tool type
- ETCH (plasma etch chamber)
- Supply
- Made to print or to sample; price and configuration confirmed by quotation
- Manufacturer
- Jishengwei (Ningbo); MST is their agent
| View product and request a quote |
|---|
| SI-SHOWERHEAD-RFQSilicon showerhead / electrode | Monocrystalline silicon showerhead / electrode for a plasma etch chamber. Made to print or to sample.Selection and part-number notes- Send a drawing or a sample, the tool model, the OEM part number, dimensions and quantity. No catalog dimensions are published; they are confirmed from your drawing or sample.
- Send a dimensioned hole map plus working-face and backside drawings. Compare hole dimensions/pattern, plate thickness, surface profile and mounting interfaces.
- State whether the enquiry covers the silicon plate only or an assembly. Matching outside diameter and hole count does not establish chamber compatibility.
- The catalogue states monocrystalline silicon but no part-specific purity, resistivity or operating limits. Supply your required values and supporting-document requirements for confirmation.
- State quantity, destination and requested arrival date. Price, configuration and dispatch are confirmed by quotation; freight and customs scope must be agreed separately.
| - Material
- Silicon (monocrystalline)
- Process / tool type
- ETCH (plasma etch chamber)
- Supply
- Made to print or to sample; price and configuration confirmed by quotation
- Manufacturer
- Jishengwei (Ningbo); MST is their agent
| View product and request a quote |
|---|
| SI-C-SHROUD-RFQSilicon C shroud / C section | Monocrystalline silicon C shroud / C section for a plasma etch chamber. Made to print or to sample.Selection and part-number notes- Send a drawing or a sample, the tool model, the OEM part number, dimensions and quantity. No catalog dimensions are published; they are confirmed from your drawing or sample.
- Identify the C shroud / C section position in the etch chamber and provide a drawing or labelled photographs of the actual part. No product photograph is published for this family.
- Confirm section profile, opening/orientation, mounting features and whether the supply is one piece or multiple sections. Agree all dimensions from the drawing or sample.
- The catalogue states monocrystalline silicon but no part-specific purity, resistivity or operating limits. Supply your required values and supporting-document requirements for confirmation.
- State quantity, destination and requested arrival date. Price, configuration and dispatch are confirmed by quotation; freight and customs scope must be agreed separately.
| - Material
- Silicon (monocrystalline)
- Process / tool type
- ETCH (plasma etch chamber)
- Supply
- Made to print or to sample; price and configuration confirmed by quotation
- Manufacturer
- Jishengwei (Ningbo); MST is their agent
| View product and request a quote |
|---|
| SI-TRAY-RFQSilicon tray | Monocrystalline silicon tray for PVD and CVD process use. Made to print or to sample.Selection and part-number notes- Send a drawing or a sample, the tool model, the OEM part number, dimensions and quantity. No catalog dimensions are published; they are confirmed from your drawing or sample.
- Identify the PVD/CVD tool and tray position. Compare pocket/support geometry, wafer arrangement, overall dimensions and mating interfaces.
- Clarify whether the enquiry includes inserts or only the silicon tray. State the required surface, cleanliness and inspection criteria for the intended process.
- The catalogue states monocrystalline silicon but no part-specific purity, resistivity or operating limits. Supply your required values and supporting-document requirements for confirmation.
- State quantity, destination and requested arrival date. Price, configuration and dispatch are confirmed by quotation; freight and customs scope must be agreed separately.
| - Material
- Silicon (monocrystalline)
- Process / tool type
- PVD / CVD
- Supply
- Made to print or to sample; price and configuration confirmed by quotation
- Manufacturer
- Jishengwei (Ningbo); MST is their agent
| View product and request a quote |
|---|
| SI-GUARD-RING-RFQSilicon guard ring / edge ring | Monocrystalline silicon guard ring / edge ring for an RTP tool. Made to print or to sample.Selection and part-number notes- Send a drawing or a sample, the tool model, the OEM part number, dimensions and quantity. No catalog dimensions are published; they are confirmed from your drawing or sample.
- Identify the RTP tool configuration, wafer diameter and ring position. Compare the full cross-section, support geometry and mating interfaces against the approved drawing.
- Include the required thermal-process conditions and acceptance criteria. An etch edge ring is not a confirmed alternative merely because it has a similar name or appearance.
- The catalogue states monocrystalline silicon but no part-specific purity, resistivity or operating limits. Supply your required values and supporting-document requirements for confirmation.
- State quantity, destination and requested arrival date. Price, configuration and dispatch are confirmed by quotation; freight and customs scope must be agreed separately.
| - Material
- Silicon (monocrystalline)
- Process / tool type
- RTP
- Supply
- Made to print or to sample; price and configuration confirmed by quotation
- Manufacturer
- Jishengwei (Ningbo); MST is their agent
| View product and request a quote |
|---|